Raised foamed channels - Upholstery
✅Get our courses at: https://www.cechaflo.com
-----------------------------------
I want to share one way to topstitch high relief channels. In previous videos I have already shown this method. A narrow presser foot is useful for this task. I was after one of these items on the internet with no success. So, I made up my mind to make a hand made one. So far, it works out perfectly. As we can see the narrow feet freely run along the crevice bottom between the 1.8 cm thick foam pads. The foam thickness could be higher. I think, if I would have used a regular foot it would have been almost impossible.This method could somehow replace the tuck&roll method. In the following video I will show how a 'boxing panel' is sewn down to the main panel without altering the bulky view of the raised channels. It will be necessary another special foot to do the sewing.
This demonstration is done in vinyl but it could also be leather or fabric.
I hope you find useful tips in this video!
Cesar
-----------------------------------
✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
Видео Raised foamed channels - Upholstery канала Cechaflo
-----------------------------------
I want to share one way to topstitch high relief channels. In previous videos I have already shown this method. A narrow presser foot is useful for this task. I was after one of these items on the internet with no success. So, I made up my mind to make a hand made one. So far, it works out perfectly. As we can see the narrow feet freely run along the crevice bottom between the 1.8 cm thick foam pads. The foam thickness could be higher. I think, if I would have used a regular foot it would have been almost impossible.This method could somehow replace the tuck&roll method. In the following video I will show how a 'boxing panel' is sewn down to the main panel without altering the bulky view of the raised channels. It will be necessary another special foot to do the sewing.
This demonstration is done in vinyl but it could also be leather or fabric.
I hope you find useful tips in this video!
Cesar
-----------------------------------
✅Any donation to support the channel will be much appreciated!
Paypal : cechaflo@gmail.com
Видео Raised foamed channels - Upholstery канала Cechaflo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Car seat reupholstery using old cover as templatesHow to mold a car carpet OEM LIKE - No heat gunCar seat upholstery from scratchCar sun visors upholstery - Vinyl cover & cardboard makingHandmade special presser foot for foamed bulky channels - Automotive upholsterySewing Tips - Leather UpholsteryMaking a Waist Bag in Leather - Leather UpholsteryChain fence pattern - UpholsteryHomemade Paff 1245-706/47 presser foot #presserfoot #upholstery #paff #sewingmachineCustom motorcycle seat - Leather upholsteryHow to Reupholster a Bike Seat - Upholstery for beginersMercedes Benz door panel - How to upholster the lower cargo pocket (3/5)3D Foamed design - Raised square diamonds - Upholstery tipsHomemade double needle presser foot #presserfoot #upholstery #durkoppadler #sewingmachineA Car Seat Bolster using Piping and French Seams - Car UpholsterySteering wheel - European stitches #steeringwheel #steeringwheelcoverBasic shift boot | Auto gear shift knob cover | #Shorts #Upholstery #Car UpholsteryCustom twin needle piping foot for a Dürkopp Adler Sewing Machine out of Iron Scrap - Car UpholsteryTwin needle presser feet made out of scrap | Raised pleats - Car upholstery / FurnitureOversewing high raised foamed channels - Upholstery Tips