How to Hold Down Velcro to Foam - Car Upholstery
✅Get our courses at: https://www.cechaflo.com
------------------------------------------------------------------------------------------------------------
This time I want to share a tip on how to hold down a velcro strip to a foam base by using the regular upholstery yellow glue.
The hook side strip should be glued down to the foam material.
To get the best adherence a piece of synthetic mesh should be sewn down on the reverse side of velcro material (hook side velcro).
By using a brush a dense coat of yellow glue should be spreaded over the mesh letting it penetrate through the mesh to the wrong side of velcro too.
This first coat of glue should thoroughly dry to apply a second coat.
The same process is done on the foam area where the velcro (mesh side) will be glued down.
The mesh helps a lot to gather a good amount of glue that after it is dry it will grasp very hard to the foam area. Besides the velcro fasteners will remain flexible because of the yellow glue.
I dare to say the adhesion is very resistant.
I hope you enjoy this video and find it useful!
Cesar
Видео How to Hold Down Velcro to Foam - Car Upholstery канала Cechaflo
------------------------------------------------------------------------------------------------------------
This time I want to share a tip on how to hold down a velcro strip to a foam base by using the regular upholstery yellow glue.
The hook side strip should be glued down to the foam material.
To get the best adherence a piece of synthetic mesh should be sewn down on the reverse side of velcro material (hook side velcro).
By using a brush a dense coat of yellow glue should be spreaded over the mesh letting it penetrate through the mesh to the wrong side of velcro too.
This first coat of glue should thoroughly dry to apply a second coat.
The same process is done on the foam area where the velcro (mesh side) will be glued down.
The mesh helps a lot to gather a good amount of glue that after it is dry it will grasp very hard to the foam area. Besides the velcro fasteners will remain flexible because of the yellow glue.
I dare to say the adhesion is very resistant.
I hope you enjoy this video and find it useful!
Cesar
Видео How to Hold Down Velcro to Foam - Car Upholstery канала Cechaflo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1997 Nissan Skyline R33 GT-R Project - More pieces from Japan (Part 4/6)Car seat headrest upholstery - Automotive upholsteryHow to Reupholster a Bike Seat - Upholstery for beginersCustom car door panel - Automotive upholsteryVintage Ford 1972 truck seat - Custom reupholsteryLow Relief Foamed Square Pattern - Auto Upholstery/FurnitureCar seat reupholstery using old cover as templatesCar sun visors upholstery - Vinyl cover & cardboard makingCustom cardboard panel (bricks design) - Automotive Upholstery & FurnitureBasic OEM shift boot coverHow to sew an angled junction - Upholstery tipSeat bolster repair - Car upholsteryTwin needle presser feet made out of scrap | Raised pleats - Car upholstery / FurnitureMaking a Waist Bag in Leather - Leather UpholsteryA Car Seat Bolster using Piping and French Seams - Car UpholsterySewing Tips - Leather UpholsteryRaised foamed channels - UpholsteryLeather Handsewing - Decorative Tray ( Part One) Handcrafts in leatherA car seat leather bolster fits like a glove - Automotive upholsteryNEW COURSE How to wrap in leather a car door panel #Upholstery #Courses #Tapiceria