- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
Have you ever tuned a snare like this? #shorts #short #control #dot #tone #drums #snaredrum #drum
(🎧 encouraged) (Read below)
Get That Sound: 14” x 5” present snappy high Tuning Process
.
.
.
I have about 3 or 4 aluminum snare drums in my collection and they all sound different. For this specific snare drum, I love keeping it tuned this way. This drum does this tuning so well and even though it can do it all I love it in this tuning.
Let’s get into it. 🥁
This tuning is built on a well-tuned snare-side head and properly tensioned snare wires.
With that said, the snare-side head is tight sitting at 408 Hz (G Sharpe 4) but still has some give. The snare wires have just the right amount of tension, not too tight or too loose, allowing them to breathe without sounding choked.
This setup gives the snare drum great sensitivity and articulation, even at lower tuning.
Now, the batter-side tuning is a little more involved.
For starters, I evenly finger-tighten each tension rod as much as possible until I can’t pull them any further with the Pull Cord Drum Key.
After finger-tightening, I use quarter turns to gradually increase the tension.
This approach adds enough tension while still letting you clearly hear the shell and head working together
The secret sauce in this process comes down to the drum key technique and drumhead choice.
The drum key technique helps me keep track of the tension and know exactly how much further I need to go to reach the desired pitch.
After that, I fine-tune and check pitches with the @tunebotdrum just for reference and learning.
The @earthtonedrumheads 14" Calfskin Drumhead delivers a warm vintage sound that lends itself to both stage and studio. Earthtone heads are specially tanned and treated to reduce fluctuation while tuning.
This 14” x 5” aluminum snare drum tightens up quickly, so having solid drum key control and knowing your drumhead is essential to nailing that sweet spot.
What do you guys think? How do you achieve a present yet snappy high snare sound? Does your process look similar to this? Drop a comment and let’s talk about it!
Love you, guys!! Okay, byeeeee! 🥁🤓❤️
—
#testabeatdrums #snaretuning #tunebot #snaredrum #drums
Видео Have you ever tuned a snare like this? #shorts #short #control #dot #tone #drums #snaredrum #drum канала Nate Testa
Get That Sound: 14” x 5” present snappy high Tuning Process
.
.
.
I have about 3 or 4 aluminum snare drums in my collection and they all sound different. For this specific snare drum, I love keeping it tuned this way. This drum does this tuning so well and even though it can do it all I love it in this tuning.
Let’s get into it. 🥁
This tuning is built on a well-tuned snare-side head and properly tensioned snare wires.
With that said, the snare-side head is tight sitting at 408 Hz (G Sharpe 4) but still has some give. The snare wires have just the right amount of tension, not too tight or too loose, allowing them to breathe without sounding choked.
This setup gives the snare drum great sensitivity and articulation, even at lower tuning.
Now, the batter-side tuning is a little more involved.
For starters, I evenly finger-tighten each tension rod as much as possible until I can’t pull them any further with the Pull Cord Drum Key.
After finger-tightening, I use quarter turns to gradually increase the tension.
This approach adds enough tension while still letting you clearly hear the shell and head working together
The secret sauce in this process comes down to the drum key technique and drumhead choice.
The drum key technique helps me keep track of the tension and know exactly how much further I need to go to reach the desired pitch.
After that, I fine-tune and check pitches with the @tunebotdrum just for reference and learning.
The @earthtonedrumheads 14" Calfskin Drumhead delivers a warm vintage sound that lends itself to both stage and studio. Earthtone heads are specially tanned and treated to reduce fluctuation while tuning.
This 14” x 5” aluminum snare drum tightens up quickly, so having solid drum key control and knowing your drumhead is essential to nailing that sweet spot.
What do you guys think? How do you achieve a present yet snappy high snare sound? Does your process look similar to this? Drop a comment and let’s talk about it!
Love you, guys!! Okay, byeeeee! 🥁🤓❤️
—
#testabeatdrums #snaretuning #tunebot #snaredrum #drums
Видео Have you ever tuned a snare like this? #shorts #short #control #dot #tone #drums #snaredrum #drum канала Nate Testa
Комментарии отсутствуют
Информация о видео
26 мая 2026 г. 4:00:08
00:00:20
Другие видео канала




















