DIY $10 Cardboard Starburst clock - vintage Mid century Elgin clock replica

Another kinda cool DIY cardboard project- I built a replica of a vintage 1950s Elgin Starburst Clock from a $10 Target clock, some contact paper, and cardboard.
I used hot glue to attach the parts. At the end of the video is a photo of the diagram showing my measurements of the clock ray. Unfortunately, my scanner would not connect to scan the diagram so I had to use a regular photo.
This project is not quick, but it is simple and the results were good considering I did not wrap the paper to the cardboard as well as I should have. I ended up using an x-acto knife as my DIY craft knife was not sharp enough.
If you guys have any cardboard DIY project suggestions let me know in the comments. I may be making an ocean liner and recording a series around the ship that may be entertaining or evidence of a need for medication, LOL

My DIY Video playlist
https://www.youtube.com/playlist?list=PL84985CDA64033492
A few very special people have saved the Amazon link I will provide below and use the link to enter Amazon and buy the stuff they normally buy on Amazon. This is my link to my Amazon store where you can see stuff I have bought and liked a lot over the years. You do not have to buy anything from the store, just by using my link to enter Amazon anything you buy on Amazon will help me out at no cost to you. Didn't you want to buy an island or jet aircraft on Amazon today?
https://www.amazon.com/shop/robbshomemadelife
I want to thank you guys again for showing up and watching me trying to have a little fun or show you something that might help you out. I made YouTube videos for fun years before they paid a penny and I will continue to do so as long as it is fun.
see ya out there.
Robb Moffett

Видео DIY $10 Cardboard Starburst clock - vintage Mid century Elgin clock replica канала Robb's Homemade Life