Flashforge Dreamer (NX) - Polymaker Gold PETG 1.75mm Filament Testing - Part 1
This two-part video shows the testing of Polymaker Gold PETG 1.75mm Filament and compares it to Hatchbox Gold PETG which I review in the next set of videos.
Part 1 shows unboxing, and using a Temperature Tower to evaluate the best extrusion temperature to use as well as a Bed and Layer Adhesion Test to evaluate the best bed temperature and cooling profile to get the best results. Extrusion problems, mean I had to change out the heat break tube and try again in Part 2.
Part 2 covers further Bed and Layer Adhesion testing, printing 3dBenchy for a fun print which shows the problems of using 0% fan with PETG, and finishes with using it to print a new product: a tray to hold the Sabacc Pot for the Star Wars Sabacc (poker) game. I compare the Polymaker PETG to Hatchbox PETG (review coming up next) to make the product and shows the winner.
Link to Sabacc Pot Tray on my Etsy Store:
https://betacygnidesigns.etsy.com/listing/1261118300/sabacc-pot-tray-pspa-approved?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1694613832264
Link to Polymaker Gold PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B09H2SHPD9/
Link to Hatchbox Gold PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B01C6BRXLY/
Link to Temperature Tower Thingiverse Project:
https://www.thingiverse.com/thing:4356906
Link to Bed Adhesion and Layer Cracking Test
https://www.thingiverse.com/thing:4536632
Link to 3dBenchy on Thingiverse:
https://www.thingiverse.com/thing:763622
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
This is the wire brass brush I use to clean the nozzle tip:
https://smile.amazon.com/gp/product/B01J2BS92S/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
OpenSCAD website:
https://www.openscad.org/
I used Simplify3D slicer software for the test:
https://www.simplify3d.com/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Flashforge Dreamer (NX) - Polymaker Gold PETG 1.75mm Filament Testing - Part 1 канала Beta Cygni
Part 1 shows unboxing, and using a Temperature Tower to evaluate the best extrusion temperature to use as well as a Bed and Layer Adhesion Test to evaluate the best bed temperature and cooling profile to get the best results. Extrusion problems, mean I had to change out the heat break tube and try again in Part 2.
Part 2 covers further Bed and Layer Adhesion testing, printing 3dBenchy for a fun print which shows the problems of using 0% fan with PETG, and finishes with using it to print a new product: a tray to hold the Sabacc Pot for the Star Wars Sabacc (poker) game. I compare the Polymaker PETG to Hatchbox PETG (review coming up next) to make the product and shows the winner.
Link to Sabacc Pot Tray on my Etsy Store:
https://betacygnidesigns.etsy.com/listing/1261118300/sabacc-pot-tray-pspa-approved?utm_source=Copy&utm_medium=ListingManager&utm_campaign=Share&utm_term=so.lmsm&share_time=1694613832264
Link to Polymaker Gold PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B09H2SHPD9/
Link to Hatchbox Gold PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B01C6BRXLY/
Link to Temperature Tower Thingiverse Project:
https://www.thingiverse.com/thing:4356906
Link to Bed Adhesion and Layer Cracking Test
https://www.thingiverse.com/thing:4536632
Link to 3dBenchy on Thingiverse:
https://www.thingiverse.com/thing:763622
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
This is the wire brass brush I use to clean the nozzle tip:
https://smile.amazon.com/gp/product/B01J2BS92S/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
OpenSCAD website:
https://www.openscad.org/
I used Simplify3D slicer software for the test:
https://www.simplify3d.com/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Flashforge Dreamer (NX) - Polymaker Gold PETG 1.75mm Filament Testing - Part 1 канала Beta Cygni
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Flashforge Dreamer (NX) - Hatchbox Gold PETG 1.75mm Filament Testing - Part 1](https://i.ytimg.com/vi/f420o6sfpIM/default.jpg)
![Greenworks 10.5 Amp 14-Inch Corded Chainsaw - Unboxing and Review](https://i.ytimg.com/vi/PrqnkiSuAJs/default.jpg)
![Flashforge Dreamer (NX) - eSun Semi-Transparent Green PETG 1.75mm Filament Testing](https://i.ytimg.com/vi/QxyhUQuGrd4/default.jpg)
![Building Garden Steps on a 20 Degree Slope - Part 3](https://i.ytimg.com/vi/KdRCEFdBhng/default.jpg)
![Building Garden Steps on a 20 Degree Slope - Part 1](https://i.ytimg.com/vi/651rpOzJSkw/default.jpg)
![3D Printing - How Long Does the Heat Break Tube Last? - Part 2](https://i.ytimg.com/vi/fu2PjBCm2VE/default.jpg)
![Flashforge Dreamer (NX) - Cleaning Print Head When Using PETG Filament](https://i.ytimg.com/vi/8cfS2lzPM4g/default.jpg)
![WeatherFlow Tempest Weather Station Unboxing, Installation, and Review - Part 4](https://i.ytimg.com/vi/n7xgWhO-W9E/default.jpg)
![Flashforge Dreamer (NX) - FilaCube Longhorn Orange PLA 1.75mm Filament Testing](https://i.ytimg.com/vi/v2AEy8F_-TY/default.jpg)
![Geocaching by Bicycle to the World Famous "Planet of the Apes" Cache in Washington State, USA](https://i.ytimg.com/vi/rHa4U4qVPSc/default.jpg)
![Hasbro Star Wars L0-LA59 (Lola) Animatronic Edition Droid - Unboxing, Review, and Use](https://i.ytimg.com/vi/kBCE-MmpUOU/default.jpg)
![Backpacking the Lost Coast of California: Planning and Hiking](https://i.ytimg.com/vi/oHUVFxNTCDE/default.jpg)
![Replacing a French Drain Sump Pump - Part 2](https://i.ytimg.com/vi/AuaV36Rct6w/default.jpg)
![Fixing a Pocket Door - Only 2 Mistakes and One Wasn't My Fault!](https://i.ytimg.com/vi/k0p-39JsZ1w/default.jpg)
![Walt Disney World Fruit Bat](https://i.ytimg.com/vi/gM_4bquCqBU/default.jpg)
![Monterey Bay Aquarium - Into the Deep Exhibit (4K)](https://i.ytimg.com/vi/NV3gMgOeHu4/default.jpg)
![Death Valley: Sunset Horseback Ride at Furnace Creek](https://i.ytimg.com/vi/k_RFzvPx3C4/default.jpg)
![Perseverance Mars Rover at the Exploratorium in San Francisco (4K)](https://i.ytimg.com/vi/0biIviwirpQ/default.jpg)
![Death Valley: Badwater Basin Sunrise Time Lapse #Shorts](https://i.ytimg.com/vi/pFNwOIMkybc/default.jpg)
![EVGA SuperNOVA 1000 T2, 80+ TITANIUM 1000W Power Supply Unboxing](https://i.ytimg.com/vi/SVpJswW29Zo/default.jpg)