Building Garden Steps on a 20 Degree Slope - Part 1
This video series covers how to build garden steps on a slope.
I have a gravel pathway along the back of my property, the ground slopes up to that path and in the winter when the ground is muddy, it's hard to get up there without slipping.
So I wanted to install a series of steps to make it easier.
Part 1 covers measuring and calculating how many steps are needed as well as reviewing the materials used for the project.
Part 2 covers cutting the risers and treating the ends of the wood with preservative. After that I show how I cut the salvaged 1/2" rebar to use to anchor the risers to the ground.
Part 3 covers installing the risers including gravel behind each riser to assist with drainage.
Part 4 covers cutting the facia boards for the steps, ripping them on my table saw. I couldn't use the full fence board width on the front of the steps; it would have been too tall and I didn't want to sink the facia board into the soil and encourage rotting.
Part 5 covers installing the redwood facia & tread, staining and adding mulch to complete the project.
Link to stair calculator:
https://www.mycarpentry.com/stair-calculator.html
Link to disposable vinyl gloves on Amazon:
https://www.amazon.com/gp/product/B08HWWKLXK/
Evolution Rage 4 Chop Saw on Amazon:
https://smile.amazon.com/gp/product/B00245U9RI/
Freud D0738FM Diablo Steel Demon Ferrous Cutting Saw Blade 7-Inch/180 mm by 38t 20 mm arbor on Amazon:
https://smile.amazon.com/gp/product/B001CZCVKO/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Building Garden Steps on a 20 Degree Slope - Part 1 канала Beta Cygni
I have a gravel pathway along the back of my property, the ground slopes up to that path and in the winter when the ground is muddy, it's hard to get up there without slipping.
So I wanted to install a series of steps to make it easier.
Part 1 covers measuring and calculating how many steps are needed as well as reviewing the materials used for the project.
Part 2 covers cutting the risers and treating the ends of the wood with preservative. After that I show how I cut the salvaged 1/2" rebar to use to anchor the risers to the ground.
Part 3 covers installing the risers including gravel behind each riser to assist with drainage.
Part 4 covers cutting the facia boards for the steps, ripping them on my table saw. I couldn't use the full fence board width on the front of the steps; it would have been too tall and I didn't want to sink the facia board into the soil and encourage rotting.
Part 5 covers installing the redwood facia & tread, staining and adding mulch to complete the project.
Link to stair calculator:
https://www.mycarpentry.com/stair-calculator.html
Link to disposable vinyl gloves on Amazon:
https://www.amazon.com/gp/product/B08HWWKLXK/
Evolution Rage 4 Chop Saw on Amazon:
https://smile.amazon.com/gp/product/B00245U9RI/
Freud D0738FM Diablo Steel Demon Ferrous Cutting Saw Blade 7-Inch/180 mm by 38t 20 mm arbor on Amazon:
https://smile.amazon.com/gp/product/B001CZCVKO/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Building Garden Steps on a 20 Degree Slope - Part 1 канала Beta Cygni
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Flashforge Guider II Unboxing and Review - Part 3](https://i.ytimg.com/vi/VJzJwsB4ETw/default.jpg)
![Flashforge Guider II Unboxing and Review - Part 1](https://i.ytimg.com/vi/50LqdgYrC6I/default.jpg)
![Canon VIXIA HF R800 , Platinum Accessory Mount, & tikysky Powered Microphone Review - Part 1](https://i.ytimg.com/vi/r928t_3eqSY/default.jpg)
![A24 Rat Trap: The Galloping Rat, Sophie, a Fox, Moving Trap 1 Foot Away, & a Lizard Catches a Fly](https://i.ytimg.com/vi/dMtMPyztsTw/default.jpg)
![Flashforge Dreamer (NX) - Polymaker Gold PETG 1.75mm Filament Testing - Part 1](https://i.ytimg.com/vi/oHw058cX4r4/default.jpg)
![Greenworks 10.5 Amp 14-Inch Corded Chainsaw - Unboxing and Review](https://i.ytimg.com/vi/PrqnkiSuAJs/default.jpg)
![Flashforge Dreamer (NX) - eSun Semi-Transparent Green PETG 1.75mm Filament Testing](https://i.ytimg.com/vi/QxyhUQuGrd4/default.jpg)
![3D Printing - How Long Does the Heat Break Tube Last? - Part 2](https://i.ytimg.com/vi/fu2PjBCm2VE/default.jpg)
![Flashforge Dreamer (NX) - Cleaning Print Head When Using PETG Filament](https://i.ytimg.com/vi/8cfS2lzPM4g/default.jpg)
![WeatherFlow Tempest Weather Station Unboxing, Installation, and Review - Part 4](https://i.ytimg.com/vi/n7xgWhO-W9E/default.jpg)
![WeatherFlow Tempest Weather Station Unboxing, Installation, and Review - Part 3](https://i.ytimg.com/vi/PL97xNJe9UU/default.jpg)
![Flashforge Dreamer (NX) - FilaCube Longhorn Orange PLA 1.75mm Filament Testing](https://i.ytimg.com/vi/v2AEy8F_-TY/default.jpg)
![Geocaching by Bicycle to the World Famous "Planet of the Apes" Cache in Washington State, USA](https://i.ytimg.com/vi/rHa4U4qVPSc/default.jpg)
![Hasbro Star Wars L0-LA59 (Lola) Animatronic Edition Droid - Unboxing, Review, and Use](https://i.ytimg.com/vi/kBCE-MmpUOU/default.jpg)
![Backpacking the Lost Coast of California: Planning and Hiking](https://i.ytimg.com/vi/oHUVFxNTCDE/default.jpg)
![Computer Midlife Crisis - Upgrading a 5 year old computer with new graphics board, etc. - Part 5](https://i.ytimg.com/vi/OSQz44B-t98/default.jpg)
![Replacing a French Drain Sump Pump - Part 2](https://i.ytimg.com/vi/AuaV36Rct6w/default.jpg)
![Ripley's Aquarium of Canada - Toronto](https://i.ytimg.com/vi/_uQV9k57840/default.jpg)
![Fixing a Pocket Door - Only 2 Mistakes and One Wasn't My Fault!](https://i.ytimg.com/vi/k0p-39JsZ1w/default.jpg)
![Walt Disney World Fruit Bat](https://i.ytimg.com/vi/gM_4bquCqBU/default.jpg)