Flashforge Dreamer (NX) - eSun Semi-Transparent Green PETG 1.75mm Filament Testing
This video shows the testing of eSun Semi-Transparent Green PETG 1.75mm Filament and making a product for my Etsy store.
It starts with unboxing and weighing and then uses a Temperature Tower to evaluate the best extrusion temperature to use. I skip the Bed and Layer adhesion test this time since the tower layer adhesion is great and the parameters for best printing are the same as I'm using for all other PETG filament I print. There's a sneak peek at my new 3d printer which I'll be reviewing soon!
Link to Star Wars Holocron and Savi's workshop lightsaber compatible kyber crystals on my Etsy Store:
https://www.etsy.com/listing/955431601/star-wars-individual-or-complete-set-of
Link to eSun Semi-Transparent Green PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B010Y25PQC/
Link to Temperature Tower Thingiverse Project:
https://www.thingiverse.com/thing:4356906
Link to Bed Adhesion and Layer Cracking Test
https://www.thingiverse.com/thing:4536632
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
This is the wire brass brush I use to clean the nozzle tip:
https://smile.amazon.com/gp/product/B01J2BS92S/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
OpenSCAD website:
https://www.openscad.org/
I used Simplify3D slicer software for the test:
https://www.simplify3d.com/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Flashforge Dreamer (NX) - eSun Semi-Transparent Green PETG 1.75mm Filament Testing канала Beta Cygni
It starts with unboxing and weighing and then uses a Temperature Tower to evaluate the best extrusion temperature to use. I skip the Bed and Layer adhesion test this time since the tower layer adhesion is great and the parameters for best printing are the same as I'm using for all other PETG filament I print. There's a sneak peek at my new 3d printer which I'll be reviewing soon!
Link to Star Wars Holocron and Savi's workshop lightsaber compatible kyber crystals on my Etsy Store:
https://www.etsy.com/listing/955431601/star-wars-individual-or-complete-set-of
Link to eSun Semi-Transparent Green PETG Filament 1.75mm on Amazon:
https://smile.amazon.com/gp/product/B010Y25PQC/
Link to Temperature Tower Thingiverse Project:
https://www.thingiverse.com/thing:4356906
Link to Bed Adhesion and Layer Cracking Test
https://www.thingiverse.com/thing:4536632
These are the spatulas I used to help remove the pieces from the print bed:
https://smile.amazon.com/gp/product/B075SLTY8B/
These are the tweezers I used to help remove dripping filament from the print head:
https://smile.amazon.com/gp/product/B0845SKD7Z/
This is the wire brass brush I use to clean the nozzle tip:
https://smile.amazon.com/gp/product/B01J2BS92S/
Flashforge Dreamer NX on Amazon:
https://smile.amazon.com/gp/product/B07DPBRCYZ/
OpenSCAD website:
https://www.openscad.org/
I used Simplify3D slicer software for the test:
https://www.simplify3d.com/
-------------------
Link to my Etsy Store:
https://betacygnidesigns.etsy.com/
---------------------
Music:
"Blippy Trance" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/by/4.0/
---------------------
End Screen Video Acknowledgement: Cosmic Reef Video produced by NASA and the Space Telescope Science Institute (STScI).
https://hubblesite.org/contents/media/videos/2020/16/1277-Video
Видео Flashforge Dreamer (NX) - eSun Semi-Transparent Green PETG 1.75mm Filament Testing канала Beta Cygni
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![USS Hornet Restoration of Grumman US2B Tracker #Shorts](https://i.ytimg.com/vi/E3zjzPDsIBM/default.jpg)
![Mika3D Shiny Silk Silver PLA Testing on Flashforge Dreamer NX 3d Printer - Part 2](https://i.ytimg.com/vi/o59UheMfcfg/default.jpg)
![Flashforge Dreamer (NX) - Cold Weather Printing](https://i.ytimg.com/vi/5Kym4OWrCYo/default.jpg)
![Replacing a Pull-up Bar on a Play Structure](https://i.ytimg.com/vi/cqUwJEzFLEg/default.jpg)
![Green Army Men @ Disney California Adventure #Shorts](https://i.ytimg.com/vi/XldgnncJGnk/default.jpg)
![Replacing a French Drain Sump Pump - Part 2](https://i.ytimg.com/vi/AuaV36Rct6w/default.jpg)
![3D Printing - How Long Does the Heat Break Tube Last? - Part 2](https://i.ytimg.com/vi/fu2PjBCm2VE/default.jpg)
![Building Garden Steps on a 20 Degree Slope - Part 1](https://i.ytimg.com/vi/651rpOzJSkw/default.jpg)
![Hun Skal Leve (Hunskaleva) #Shorts](https://i.ytimg.com/vi/V_H_pT0XBxk/default.jpg)
![Walt Disney World Fruit Bat](https://i.ytimg.com/vi/gM_4bquCqBU/default.jpg)
![Sea Lions at Elkhorn Slough #Shorts](https://i.ytimg.com/vi/Sur8Czx5Da8/default.jpg)
![Dik Dik Eating #Shorts](https://i.ytimg.com/vi/kvBk6o-6liI/default.jpg)
![Snorkeling on the Kona Coast #Shorts](https://i.ytimg.com/vi/za9nabYmICc/default.jpg)
![Flashforge Dreamer (NX) - Replacing Printhead & Nozzle plus switching to a Silicone Sock - Part 2](https://i.ytimg.com/vi/gMY6RuqFAug/default.jpg)
![Flashforge Dreamer (NX) - Testing HQA PETG Filament - Part 1](https://i.ytimg.com/vi/rgFaMaksVnQ/default.jpg)
![Calibrating Your LG TV Yourself!](https://i.ytimg.com/vi/rYE2lqGIpG4/default.jpg)
![Flashforge Dreamer (NX) - FilaCube Gray PLA - Testing & Millennium Falcon Dice Tower - Part 2](https://i.ytimg.com/vi/1KyeofOgWxI/default.jpg)
![Flashforge Dreamer (NX) - Getting Amazon Basics PLA Filament to Print Reliably](https://i.ytimg.com/vi/b_KsHEYEx6k/default.jpg)
![Evolution Rage 4 Chop Saw Custom Stop Block](https://i.ytimg.com/vi/v0kGVrIduqg/default.jpg)
![WeatherFlow Tempest Weather Station Unboxing, Installation, and Review - Part 4](https://i.ytimg.com/vi/n7xgWhO-W9E/default.jpg)
![FlashForge Guider II - Make Spool Holder Bracket Compatible With the Filler Filament Roller - Part 1](https://i.ytimg.com/vi/LTOu0oIhGko/default.jpg)