RF IMS Power Supply pt 6
visit our Non Profit green energy web page for science projects for school and home at http://www.lablancinventors.org
visit our web site for more pics of this radio we are writing the book on at http://www.lablancinventors.org/pics
Silver plated solid core copper wire with Teflon insulation (RF wire) is available at: http://www.apexjr.com
This revolutionary Radio design has terminal blocks to hold all the plate and screen grid dropping power resistors to allow easy changes to the voltages for each tube without unsoldering these resistors and soldering in new! This allows less heat also under each tube leading to cooler running tubes.
The tank coil and air capacitor allow tuning of each segment of the tube circuit from outside of the chassis. In the process of getting the right amount of impedance of this tank circuit. The high voltage wire bundle for the plate and screen grids is shielded from RF coupling into the power supply. This bundle if wrapped with white PVC tape first and then aluminum duct tape and then a # 22 bare copper wire spirals around the aluminum wrap and then ONE end is soldered into the ground buss. Then another layer of white PVC tape covers the copper spiral wind.
Видео RF IMS Power Supply pt 6 канала Lablanc Engineering-two
visit our web site for more pics of this radio we are writing the book on at http://www.lablancinventors.org/pics
Silver plated solid core copper wire with Teflon insulation (RF wire) is available at: http://www.apexjr.com
This revolutionary Radio design has terminal blocks to hold all the plate and screen grid dropping power resistors to allow easy changes to the voltages for each tube without unsoldering these resistors and soldering in new! This allows less heat also under each tube leading to cooler running tubes.
The tank coil and air capacitor allow tuning of each segment of the tube circuit from outside of the chassis. In the process of getting the right amount of impedance of this tank circuit. The high voltage wire bundle for the plate and screen grids is shielded from RF coupling into the power supply. This bundle if wrapped with white PVC tape first and then aluminum duct tape and then a # 22 bare copper wire spirals around the aluminum wrap and then ONE end is soldered into the ground buss. Then another layer of white PVC tape covers the copper spiral wind.
Видео RF IMS Power Supply pt 6 канала Lablanc Engineering-two
Показать
Комментарии отсутствуют
Информация о видео
30 апреля 2016 г. 23:38:29
00:03:59
Другие видео канала
In Hell for my sexual sinsVacuum Tube Amp for Pro AudioRF IMS POWER SUPPLY pt 3Ed Gray exp. 10 (rotary commutator 3)10 Habits That EMASCULATE Men in a MarriageGOD OPENS BLIND EYESWhy Men NEED Sexmagnet motor with rotating stator demoRevamp your sex life in 6 minutes 'Ruth Ramsay'plasma6hho gas from Bedini pulser (3.26.22)OVER UNITY Magnetic experiment 2Cooling system for your HHO cellsPastor Judy's Sunday School 'we must walk in the HOLY SPIRIT'donald L. Smith exp. 26HHO micro torchHHO gas made from 3VDC (take 2)spark gap2 Plasma from OxygenJESUS CHRIST heals Betty Baxter (crippled from birth) NDEplasma5