Cooling system for your HHO cells

lablancinventors.org is our nonprofit R&D web site please go there to donate to our research.
we are cooling the distilled water /Koh inside a 12 cell HHO generator with a transmission oil cooler. this cooler is copper tubed. do not use aluminum tubed or sodium hydroxide will eat it up!
The fans are 120 mm box fans like a computer uses at 12 volts. also available on Amazon for 18$ for 2 of them without a power supply.
The hot water pump is also 12 volts DC and it comes with power supply for around 30$ on Amazon. Its a bayite BYT-7A015 DC 12 V. It puts out 9 foot head pressure at 2.1 gpm. and good up to 131F.
I run it day and night for my tests. The 10 inch and 5 inch filter housings and elements are also available on Amazon. We use 1 and 5 micro sediment filter elements made from fine melted polypropylene.
The temp controller uses the "Cooling" outlet to power the 120 vac to 12 volt DC power supply for the cooling fans. Temp controller is called: Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling. available on Amazon for 35$.
Note: do not add hand soap to water for HHO cells only fine powder for clothes or dishwasher and then only a small pinch.
NOTE: transmission oil cooler is made from copper tubing with aluminum fins. don't want to get a aluminum tube unit because sodium hydroxide will eat it up!
.
Dr.Ohmasa (Ohmasa gas)
https://youtu.be/NUPE0Z9V82E?feature=shared

Видео Cooling system for your HHO cells канала Lablanc Engineering-two