- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
Antique Rusted Oiler Restoration - Workshop DC
#Restoration #WorkshopDC #ASMR
Antique Rusted Oiler Restoration - Workshop DC
Hello guys!
In today's video I Restored an Old Oiler.
Used for internal lubrication of parts without having to open.
I don't know for sure how old this piece is, but it is quite old and rare to find here in Brazil.
I took the part apart and most of the internal parts were perfect with almost no rust.
In the aluminum parts I used penetrating oil for protection, and the others I washed with degreaser.
To remove the rust I used hot water and hydrochloric acid, left the pieces for 12 hours.
The bottle had some leaks due to the dry glue, so I took it apart, only removed some imperfections with the hammer, I also removed some sharp edges.
After that I brushed everything and painted.
With the brushed parts I soldered the bottle and tested it with water to see if everything was right.
I used Primer 2 coats and Spray Red 2 coats too.
The old rubber gasket was really bad so I made a new one.
I resrored the trigger the same way as the bottle.
I removed the old hose that had been cut and restored the nozzles.
The bottle cap had an imperfection so I decided to sand it and then I brushed it.
I painted the lid too.
With a heat gun I put in a new silicone hose and installed the nozzles.
With all the parts ready, I started to assemble the Oiler.
I liked the result and made a small demonstration of how the piece works.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Hydrochloric acid;
- Primer;
- Penetrating Oil;
Equipmentis used:
- BenchGrinder;
- Plier;
- Screwdriver;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, just send a donate in the buttom, just send a donation using the "Thanks" button below the video.
My Instagram - https://www.instagram.com/workshopdcof/
My Facebook - https://www.facebook.com/workshopdcof
Видео Antique Rusted Oiler Restoration - Workshop DC канала Workshop DC
Antique Rusted Oiler Restoration - Workshop DC
Hello guys!
In today's video I Restored an Old Oiler.
Used for internal lubrication of parts without having to open.
I don't know for sure how old this piece is, but it is quite old and rare to find here in Brazil.
I took the part apart and most of the internal parts were perfect with almost no rust.
In the aluminum parts I used penetrating oil for protection, and the others I washed with degreaser.
To remove the rust I used hot water and hydrochloric acid, left the pieces for 12 hours.
The bottle had some leaks due to the dry glue, so I took it apart, only removed some imperfections with the hammer, I also removed some sharp edges.
After that I brushed everything and painted.
With the brushed parts I soldered the bottle and tested it with water to see if everything was right.
I used Primer 2 coats and Spray Red 2 coats too.
The old rubber gasket was really bad so I made a new one.
I resrored the trigger the same way as the bottle.
I removed the old hose that had been cut and restored the nozzles.
The bottle cap had an imperfection so I decided to sand it and then I brushed it.
I painted the lid too.
With a heat gun I put in a new silicone hose and installed the nozzles.
With all the parts ready, I started to assemble the Oiler.
I liked the result and made a small demonstration of how the piece works.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Hydrochloric acid;
- Primer;
- Penetrating Oil;
Equipmentis used:
- BenchGrinder;
- Plier;
- Screwdriver;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, just send a donate in the buttom, just send a donation using the "Thanks" button below the video.
My Instagram - https://www.instagram.com/workshopdcof/
My Facebook - https://www.facebook.com/workshopdcof
Видео Antique Rusted Oiler Restoration - Workshop DC канала Workshop DC
workshop workshop dc restoration restore restoring workshopdc Restoration rescue restoretion recover workshop dc restoration workshopdc restoration restoration videos videos restoration wDCof Wdc0f asmr asmr restoration satisfying satisfying asmr Antique Rusted Oiler Restoration - Workshop DC how to restore tool restoration rust remover antique oiler assemble disassemble weld welding paint red paint
Комментарии отсутствуют
Информация о видео
8 мая 2022 г. 20:00:03
00:16:38
Другие видео канала




















