Atique Husqvarna Meat Grinder - Restoration | Workshop DC

#WorkshopDC #Restoration #MeatGrinder #ASMR
Atique Husqvarna Meat Grinder - Restoration | Workshop DC
Hi guys how are you doing?

In this video you will see a Antique Husqvarna Meat Grinder being restored.
The Antique Husqvarna Meat Grinder was not in a very bad shape, but there were a lot of cast marks, rust, some melted aluminium marks and the handle needed to be replaced.
This meat Grinder is used to make meat grinded, meat grinded is used to make hamburgers, sausage and a lot of other things in any kind of food.
I started disassemble by hand with the microrectify, after that I show how parts are look. In this project I had to work in remove rust, remove cast Aluminum marks chemically that I couldn't record, brush wire, smooth cast marks, paint and polish, make a new handle in the lathe and stain the handle, file work in the grinder saw to make it sharper.
The paint to this pretty is the special point, Red paint in the surface and white paint which is made for food with high resistence inside the meat grinder.
I painted inside leaving the blades to grind any kind of food.
To rebuild i started with the handle, after that I put the Screw and the hold base and hammered the pin. Now i put the SpinScrew inside, i placed the handle and put the screw to hold the SpinScrew, now i put the Grinder Saw, the Grille and the Looked Nut and the rebuild is done.
The final result turn out perfect. I Can't test this Meat Grinder cause it belongs to a costumer of mine.

0:00 Welcome Guys!
0:37 Disassemble.
2:33 Ready to Clean.
2:55 Removing Aluminium Marks
3:13 File Work
4:07 Wire Wheeling
4:52 Paint - Primer
5:13 Paint - Red
5:49 Painting the Letters
7:01 Polishing
7:25 Making a New Handle in Lathe
8:15 Moisturizing the Handle with Olive Oil
8:36 Ready to Rebuild
11:03 Before and After
12:24 How it Works
12:33 Thanks for Watching!

Protection Equipments:
- Gloves; - https://amzn.to/3cQEwQp
- Goggles; - https://amzn.to/3e9mZmH
- Hearing Protection; - https://amzn.to/3efghf7
- Mask; - https://amzn.to/36nTJpD

Products Used:
- Degreaser; - https://amzn.to/2XkNHSB
- Rust Remover; - https://amzn.to/2WRZrwR
- Primer; - https://amzn.to/3bSdWVH
- Penetrating Oil; - https://amzn.to/36kFT7A
- Spray Primer;
- Spray Red;
- Gold Ink;

Equipments used;
- BenchGrinder;
- Hammer;
- Brush Wires;

And if you notice some english mistake please tell me, I trying to do my best to make a better content for you!
Thanks for Watching!

Please don't forget to subscribe, comment, like and share! This help me a lot!

My Instagram - https://www.instagram.com/workshopdcof/
My Facebook - https://www.facebook.com/workshopdcof

Видео Atique Husqvarna Meat Grinder - Restoration | Workshop DC канала Workshop DC