Adding String Compensation on an Acoustic Guitar | An Easy Shorthand
In this episode of DIY Guitar Making, I am returning to work on the Parlor Guitars. I give you an easy shorthand for getting proper intonation by adding the necessary increase in length to your scale length, AKA compensation, for a straight saddle.
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Adding String Compensation on an Acoustic Guitar | An Easy Shorthand канала DIY Guitar Making
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Adding String Compensation on an Acoustic Guitar | An Easy Shorthand канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a Fretboard from ScratchQ&A | How much Inlay is Too Much, Making a Saddle Slotting Jig, Tool Flatness and More!The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 3The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 1Fixing Mistakes on Guitar #86Q&A | How to Install Abalone PurflingGuitar #106 | Full Build with Commentary from the LuthierMaking a Wenge Bridge | Parlor Guitar #86Prepping the Fretboard for Fretting | Guitar #86Q&A | General or Variable Thicknessed Soundboards?Q&A | Are Routers the most Dangerous Tool in the Shop?Masterclass | Fretting Hammer Technique | Guitar #106Guitar #106 | Cutting Binding Channels | Day 13Guitar #106 | Neck Carving | Day 11 and 12Q&A | What is Falcate Bracing?Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the HeelGuitar #106 | Day 9 | Abalone Dot Inlays, InstallationString Compensation and Locating the BridgeQ&A | "Better" Tone, Hand- Cut Binding Channels, Buying Finger Planes