Prepping the Fretboard for Fretting | Guitar #86
In this episode of DIY Guitar Making, I am applying Tru oil to my Wenge fretboard and preparing the fret slots by filing a slight bevel in to each slot.
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 See Eric's Available Instruments: https://www.ericschaeferguitars.com/available-instruments/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Prepping the Fretboard for Fretting | Guitar #86 канала DIY Guitar Making
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 See Eric's Available Instruments: https://www.ericschaeferguitars.com/available-instruments/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Prepping the Fretboard for Fretting | Guitar #86 канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a Fretboard from Scratch
Q&A | How much Inlay is Too Much, Making a Saddle Slotting Jig, Tool Flatness and More!
The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6
The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 3
The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 1
Fixing Mistakes on Guitar #86
Adding String Compensation on an Acoustic Guitar | An Easy Shorthand
Q&A | How to Install Abalone Purfling
Guitar #106 | Full Build with Commentary from the Luthier
Making a Wenge Bridge | Parlor Guitar #86
Q&A | General or Variable Thicknessed Soundboards?
Q&A | Are Routers the most Dangerous Tool in the Shop?
Masterclass | Fretting Hammer Technique | Guitar #106
Guitar #106 | Cutting Binding Channels | Day 13
Guitar #106 | Neck Carving | Day 11 and 12
Q&A | What is Falcate Bracing?
Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel
Guitar #106 | Day 9 | Abalone Dot Inlays, Installation
String Compensation and Locating the Bridge
Q&A | "Better" Tone, Hand- Cut Binding Channels, Buying Finger Planes