Guitar #106 | Full Build with Commentary from the Luthier
In this episode of DIY Guitar Making: A full guitar build from start to finish! I give detailed commentary including guitar building techniques and analysis of the finished instrument.
Guitar #106 is an Orchestra Model with a 25.34" Scale, Sitka Spruce soundboard, and Nicaraguan Rosewood back and sides, with Macassar Ebony for the fretboard, bridge and appointments.
For the full playlist of Guitar #106: https://www.youtube.com/watch?v=0Yuallm2hNg&list=PLF1Ql6t0lWVrAGz4z7GO2cIr11xq58SRv&pp=gAQBiAQB
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic":
https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Guitar #106 | Full Build with Commentary from the Luthier канала DIY Guitar Making
Guitar #106 is an Orchestra Model with a 25.34" Scale, Sitka Spruce soundboard, and Nicaraguan Rosewood back and sides, with Macassar Ebony for the fretboard, bridge and appointments.
For the full playlist of Guitar #106: https://www.youtube.com/watch?v=0Yuallm2hNg&list=PLF1Ql6t0lWVrAGz4z7GO2cIr11xq58SRv&pp=gAQBiAQB
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic":
https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Guitar #106 | Full Build with Commentary from the Luthier канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a Fretboard from ScratchQ&A | How much Inlay is Too Much, Making a Saddle Slotting Jig, Tool Flatness and More!The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 3The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 1Fixing Mistakes on Guitar #86Adding String Compensation on an Acoustic Guitar | An Easy ShorthandQ&A | How to Install Abalone PurflingMaking a Wenge Bridge | Parlor Guitar #86Prepping the Fretboard for Fretting | Guitar #86Q&A | General or Variable Thicknessed Soundboards?Q&A | Are Routers the most Dangerous Tool in the Shop?Masterclass | Fretting Hammer Technique | Guitar #106Guitar #106 | Cutting Binding Channels | Day 13Guitar #106 | Neck Carving | Day 11 and 12Q&A | What is Falcate Bracing?Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the HeelGuitar #106 | Day 9 | Abalone Dot Inlays, InstallationString Compensation and Locating the BridgeQ&A | "Better" Tone, Hand- Cut Binding Channels, Buying Finger Planes