Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel
In this episode of DIY Guitar Making, I talk about the advantages of using The Robosander over a standard flush trim router bit in routing the headstock shape. I also drill the tuner holes and discuss the procedure of laying out the neckblank dimensions before shaping the heel.
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic":
https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 See Eric's Available Instruments: https://www.ericschaeferguitars.com/available-instruments/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel канала DIY Guitar Making
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic":
https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 See Eric's Available Instruments: https://www.ericschaeferguitars.com/available-instruments/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the Heel канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Prepping the Fretboard for Fretting | Guitar #86Making a Florentine Cutaway Mold for Guitar #116Rules for a Successful Guitar Repair Business - Rule 3: Seek Mutually Beneficial RelationshipsMaking a Bracing Pattern Template for My New Parlor Guitar ModelResawing A Board for Guitar PartsQ&A | Sizing Fretwire, Neck Profiling Jigs, Electric Guitar Tonewood Myths and More!Side Bending Machine Basics Part 3Recap of the 2020 Acoustic Guitar Build WorkshopsQ&A | Shrinkage Cracks in the Top, Purfling Materials, Nut Slotting and More!Guitarmaking Q&A for August 3rd, 2018Beginner Brace Carving TipsShop Rounds | Mylar Pickguards, Endpins, Brace Chisels, Finishing ClothGuitar #85 | Full Build with Commentary | Part 3Bracing the Back Plate on Guitar #87The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6Guitar #85 | Full Build with Commentary | Final Part 7Understanding Guitar Body Sizes - Podcast Ep 7Guitar #106 | Day 4 | Soundboard BracingSide Bending Machine Basics Part 2 - Essential ItemsGuitar #106 | Day 7 | Fitting and Gluing the BackplatePrepping a Ziricote Fretboard for Guitar #56