Making a Florentine Cutaway Mold for Guitar #116
In this episode of DIY Guitar Making, I build a mold for a florentine cutaway parlor guitar model. I cover the process of stacking and duplicating the pieces of the mold on the router table, fine-tuning the cutaway with a chisel, and making the best out of your latch mechanism so your mold lasts a lifetime.
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Making a Florentine Cutaway Mold for Guitar #116 канала DIY Guitar Making
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Making a Florentine Cutaway Mold for Guitar #116 канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Prepping the Fretboard for Fretting | Guitar #86Rules for a Successful Guitar Repair Business - Rule 3: Seek Mutually Beneficial RelationshipsMaking a Bracing Pattern Template for My New Parlor Guitar ModelResawing A Board for Guitar PartsSide Bending Machine Basics Part 3Recap of the 2020 Acoustic Guitar Build WorkshopsQ&A | Shrinkage Cracks in the Top, Purfling Materials, Nut Slotting and More!Guitarmaking Q&A for August 3rd, 2018Beginner Brace Carving TipsQ&A | Resonating vs Reflecting Backs, Top Thickness, Scrapwood uses, and more!Shop Rounds | Mylar Pickguards, Endpins, Brace Chisels, Finishing ClothGuitar #85 | Full Build with Commentary | Part 3Bracing the Back Plate on Guitar #87The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6Let's Make a Radial Rosette from Black Walnut!Guitar #85 | Full Build with Commentary | Final Part 7Thicknessing, Bending, and Fitting Sides to the MoldUnderstanding Guitar Body Sizes - Podcast Ep 7Guitar #106 | Day 4 | Soundboard BracingHow to Countersink Tuners | Guitar #86