Fixing Mistakes on Guitar #86
In this episode of DIY Guitar Making, I am preparing my new Parlor Guitar prototype for the finishing room. The first step is circling back around to all of the little nicks, indentations, tearouts, and all other blemishes.
In this video:
-Obscuring Soundboard Tearout
- Filing Binding Gaps
- Fixing Purfling Lines
-Touching up the Neckshape
-Filing Fret Slots Below the Tang
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Fixing Mistakes on Guitar #86 канала DIY Guitar Making
In this video:
-Obscuring Soundboard Tearout
- Filing Binding Gaps
- Fixing Purfling Lines
-Touching up the Neckshape
-Filing Fret Slots Below the Tang
🔴 All episodes available at diyguitarmaking.com
🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: https://www.ericschaeferguitars.com/learn-to-build-your-own-guitar/
🔴 Check out the online course "Building an OM Acoustic": https://www.ericschaeferguitars.com/course/building-an-om-acoustic/
🔴 To commission an instrument from Eric: https://www.ericschaeferguitars.com/instruments-ordering/
🔴 Check out the Radial Rosette Maker Jig: https://www.ericschaeferguitars.com/the-radial-rosette-maker-kit/
Видео Fixing Mistakes on Guitar #86 канала DIY Guitar Making
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Making a Fretboard from ScratchQ&A | How much Inlay is Too Much, Making a Saddle Slotting Jig, Tool Flatness and More!The Race to Finish 2 Parlor Guitars Before the Woodstock Show | Final Part 6The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 3The Race to Finish 2 Parlor Guitars before the Woodstock Show | Part 1Adding String Compensation on an Acoustic Guitar | An Easy ShorthandQ&A | How to Install Abalone PurflingGuitar #106 | Full Build with Commentary from the LuthierMaking a Wenge Bridge | Parlor Guitar #86Prepping the Fretboard for Fretting | Guitar #86Q&A | General or Variable Thicknessed Soundboards?Q&A | Are Routers the most Dangerous Tool in the Shop?Masterclass | Fretting Hammer Technique | Guitar #106Guitar #106 | Cutting Binding Channels | Day 13Guitar #106 | Neck Carving | Day 11 and 12Q&A | What is Falcate Bracing?Guitar #106 | Day 10 | Shaping the Headstock, Drilling Tuner Holes, Shaping the HeelGuitar #106 | Day 9 | Abalone Dot Inlays, InstallationString Compensation and Locating the BridgeQ&A | "Better" Tone, Hand- Cut Binding Channels, Buying Finger Planes