The Aerostat/Hot Air Balloon Project - Gore Assembly Methods
I've been designing and building hot air balloons/aerostats and there is going to be a tutorial on building them in Hackspace magazine issue 61 (I'll add the link here when the issue drops). There's a challenging bit to the assembly and, as well as some teaser clips of the early flights, this video has a short tutorial on how to assemble the gore panels for correct seam orientation.
Edit! The Hackspace magazine issue with the tutorial article and links to the plans for these balloons is now out, you can buy, subscribe, or download the magazine for free here; https://hackspace.raspberrypi.com/issues/61
Видео The Aerostat/Hot Air Balloon Project - Gore Assembly Methods канала Concrete Dog
Edit! The Hackspace magazine issue with the tutorial article and links to the plans for these balloons is now out, you can buy, subscribe, or download the magazine for free here; https://hackspace.raspberrypi.com/issues/61
Видео The Aerostat/Hot Air Balloon Project - Gore Assembly Methods канала Concrete Dog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Unboxing and quick review of the Valenta Off Roader robot kit.](https://i.ytimg.com/vi/u7wzo_f4dg8/default.jpg)
![Inflating the DIY 1.5 meter annular parachute.](https://i.ytimg.com/vi/yDaziF8_b9g/default.jpg)
![Introduction to Inkscape](https://i.ytimg.com/vi/LGnraSeGjIU/default.jpg)
![Rocketry Series Episode 5, Producing Fins, Rings, Couplers and Nosecones](https://i.ytimg.com/vi/-7t2eqds8NA/default.jpg)
![Rocketry Series Part 1, Model Rocket Overview.](https://i.ytimg.com/vi/Exm0k8jwsIs/default.jpg)
![Baffle designs and their use in High Power Rocketry](https://i.ytimg.com/vi/3eFoSN_UvD8/default.jpg)
![Successful Dual Deploy recovery flight of the ODR rocket to 2430 feet](https://i.ytimg.com/vi/xaPkryNyuUg/default.jpg)
![Merry Xmas from Concretedog](https://i.ytimg.com/vi/fGJ8y206fsw/default.jpg)
![Perfecto Shaper Part 2 update!](https://i.ytimg.com/vi/2IuC7y5hTSY/default.jpg)
![New Pin Switch Design for Rocketry and Beyond!](https://i.ytimg.com/vi/0fn_fFcgjkk/default.jpg)
![FreeCAD, creating Flat Patterns for Curved Fibreglass Rocket Nosecone Moulding](https://i.ytimg.com/vi/SRU8ui5kujc/default.jpg)
![Rocketry Series Episode 4, Brief guide to cutting tubes.](https://i.ytimg.com/vi/rDqSCXFBlQM/default.jpg)
![Rocketry Series Part 3, Lets get Scratch Building](https://i.ytimg.com/vi/ARazDn576Fw/default.jpg)
![Rocketry Series episode 6, Finishing the Scratch build and maiden flight](https://i.ytimg.com/vi/L_gLdKe3Hsg/default.jpg)
![Drop testing a DIY hexagonal annular parachute from drone](https://i.ytimg.com/vi/sCy7Ntc4bEE/default.jpg)
![Rocketry Series Part 2, OpenRocket Walk Through](https://i.ytimg.com/vi/j16vN1Pz5go/default.jpg)
![The Drop Pod Parachute Deployer (DPPD) prototype!](https://i.ytimg.com/vi/s9FfwdGEx5w/default.jpg)
![EXO-S, The Experimental Opensource Swingwing Rocket Glider!](https://i.ytimg.com/vi/evAllUUz0dU/default.jpg)
![StoRPer, A new Opensource Affordable Modular Robot Rover!](https://i.ytimg.com/vi/Y8ddx1Og3Xw/default.jpg)
![Inkscape SVG to FreeCAD](https://i.ytimg.com/vi/6LedIN5S2so/default.jpg)