Rocketry Series Part 1, Model Rocket Overview.
So here is hopefully the first in a series of videos relating to Rocketry. In this one we take a simple walk through model rockets and their components. If you want to request a topic, give feedback or want to say hey you can find me on twitter here https://twitter.com/concreted0g?lang=en
Видео Rocketry Series Part 1, Model Rocket Overview. канала Concrete Dog
Видео Rocketry Series Part 1, Model Rocket Overview. канала Concrete Dog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Unboxing and quick review of the Valenta Off Roader robot kit.Inflating the DIY 1.5 meter annular parachute.Introduction to InkscapeRocketry Series Episode 5, Producing Fins, Rings, Couplers and NoseconesBaffle designs and their use in High Power RocketrySuccessful Dual Deploy recovery flight of the ODR rocket to 2430 feetMerry Xmas from ConcretedogPerfecto Shaper Part 2 update!New Pin Switch Design for Rocketry and Beyond!FreeCAD, creating Flat Patterns for Curved Fibreglass Rocket Nosecone MouldingRocketry Series Episode 4, Brief guide to cutting tubes.Rocketry Series Part 3, Lets get Scratch BuildingThe Aerostat/Hot Air Balloon Project - Gore Assembly MethodsRocketry Series episode 6, Finishing the Scratch build and maiden flightDrop testing a DIY hexagonal annular parachute from droneRocketry Series Part 2, OpenRocket Walk ThroughThe Drop Pod Parachute Deployer (DPPD) prototype!EXO-S, The Experimental Opensource Swingwing Rocket Glider!StoRPer, A new Opensource Affordable Modular Robot Rover!Inkscape SVG to FreeCAD