Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

New Pin Switch Design for Rocketry and Beyond!

A little show and tell about some pin switch designs I'm working on for use as rocketry arming switches or for switches in dropped payloads and other projects. I'm going to stick some of these up on my Tindie Store soon and will add the link here. Also of note.. I have a total brain glitch at around 3.44 trying to remember the word "Kevlar"! These are now in stock over on my Tindie Store https://www.tindie.com/stores/concreted0g/

Видео New Pin Switch Design for Rocketry and Beyond! канала Concrete Dog
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
17 апреля 2023 г. 14:46:47
00:06:53
Concrete Dog
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
Unboxing and quick review of the Valenta Off Roader robot kit.Unboxing and quick review of the Valenta Off Roader robot kit.Inflating the DIY 1.5 meter annular parachute.Inflating the DIY 1.5 meter annular parachute.Introduction to InkscapeIntroduction to InkscapeRocketry Series Episode 5, Producing Fins, Rings, Couplers and NoseconesRocketry Series Episode 5, Producing Fins, Rings, Couplers and NoseconesRocketry Series Part 1, Model Rocket Overview.Rocketry Series Part 1, Model Rocket Overview.Baffle designs and their use in High Power RocketryBaffle designs and their use in High Power RocketrySuccessful Dual Deploy recovery flight of the ODR rocket to 2430 feetSuccessful Dual Deploy recovery flight of the ODR rocket to 2430 feetMerry Xmas from ConcretedogMerry Xmas from ConcretedogPerfecto Shaper Part 2 update!Perfecto Shaper Part 2 update!FreeCAD, creating Flat Patterns for Curved Fibreglass Rocket Nosecone MouldingFreeCAD, creating Flat Patterns for Curved Fibreglass Rocket Nosecone MouldingRocketry Series Episode 4, Brief guide to cutting tubes.Rocketry Series Episode 4, Brief guide to cutting tubes.Rocketry Series Part 3, Lets get Scratch BuildingRocketry Series Part 3, Lets get Scratch BuildingThe Aerostat/Hot Air Balloon Project - Gore Assembly MethodsThe Aerostat/Hot Air Balloon Project - Gore Assembly MethodsRocketry Series episode 6, Finishing the Scratch build and maiden flightRocketry Series episode 6, Finishing the Scratch build and maiden flightDrop testing a DIY hexagonal annular parachute from droneDrop testing a DIY hexagonal annular parachute from droneRocketry Series Part 2, OpenRocket Walk ThroughRocketry Series Part 2, OpenRocket Walk ThroughThe Drop Pod Parachute Deployer (DPPD) prototype!The Drop Pod Parachute Deployer (DPPD) prototype!EXO-S, The Experimental Opensource Swingwing Rocket Glider!EXO-S, The Experimental Opensource Swingwing Rocket Glider!Evil helicopter attack leads to annealing 3D print hack!Evil helicopter attack leads to annealing 3D print hack!Inkscape SVG to FreeCADInkscape SVG to FreeCAD
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала