Rocketry Series Part 2, OpenRocket Walk Through
Here we go with part 2 of the rocketry series with the promised walk through of the fabulous free and opensource openrocket design and simulation software. Part 1 of the series is here
https://www.youtube.com/watch?v=Exm0k8jwsIs
You can find openrocket here to download
http://openrocket.info/
Also I wrote an article for Hackspace magazine on how to use openrocket in issue 12, you can download a free PDF of the issue here
https://hackspace.raspberrypi.org/issues/12
Видео Rocketry Series Part 2, OpenRocket Walk Through канала Concrete Dog
https://www.youtube.com/watch?v=Exm0k8jwsIs
You can find openrocket here to download
http://openrocket.info/
Also I wrote an article for Hackspace magazine on how to use openrocket in issue 12, you can download a free PDF of the issue here
https://hackspace.raspberrypi.org/issues/12
Видео Rocketry Series Part 2, OpenRocket Walk Through канала Concrete Dog
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Unboxing and quick review of the Valenta Off Roader robot kit.](https://i.ytimg.com/vi/u7wzo_f4dg8/default.jpg)
![Inflating the DIY 1.5 meter annular parachute.](https://i.ytimg.com/vi/yDaziF8_b9g/default.jpg)
![Introduction to Inkscape](https://i.ytimg.com/vi/LGnraSeGjIU/default.jpg)
![Rocketry Series Episode 5, Producing Fins, Rings, Couplers and Nosecones](https://i.ytimg.com/vi/-7t2eqds8NA/default.jpg)
![Rocketry Series Part 1, Model Rocket Overview.](https://i.ytimg.com/vi/Exm0k8jwsIs/default.jpg)
![Baffle designs and their use in High Power Rocketry](https://i.ytimg.com/vi/3eFoSN_UvD8/default.jpg)
![Successful Dual Deploy recovery flight of the ODR rocket to 2430 feet](https://i.ytimg.com/vi/xaPkryNyuUg/default.jpg)
![Merry Xmas from Concretedog](https://i.ytimg.com/vi/fGJ8y206fsw/default.jpg)
![Perfecto Shaper Part 2 update!](https://i.ytimg.com/vi/2IuC7y5hTSY/default.jpg)
![New Pin Switch Design for Rocketry and Beyond!](https://i.ytimg.com/vi/0fn_fFcgjkk/default.jpg)
![FreeCAD, creating Flat Patterns for Curved Fibreglass Rocket Nosecone Moulding](https://i.ytimg.com/vi/SRU8ui5kujc/default.jpg)
![Rocketry Series Episode 4, Brief guide to cutting tubes.](https://i.ytimg.com/vi/rDqSCXFBlQM/default.jpg)
![Rocketry Series Part 3, Lets get Scratch Building](https://i.ytimg.com/vi/ARazDn576Fw/default.jpg)
![The Aerostat/Hot Air Balloon Project - Gore Assembly Methods](https://i.ytimg.com/vi/wgA92SjcO5Y/default.jpg)
![Rocketry Series episode 6, Finishing the Scratch build and maiden flight](https://i.ytimg.com/vi/L_gLdKe3Hsg/default.jpg)
![Drop testing a DIY hexagonal annular parachute from drone](https://i.ytimg.com/vi/sCy7Ntc4bEE/default.jpg)
![The Drop Pod Parachute Deployer (DPPD) prototype!](https://i.ytimg.com/vi/s9FfwdGEx5w/default.jpg)
![EXO-S, The Experimental Opensource Swingwing Rocket Glider!](https://i.ytimg.com/vi/evAllUUz0dU/default.jpg)
![StoRPer, A new Opensource Affordable Modular Robot Rover!](https://i.ytimg.com/vi/Y8ddx1Og3Xw/default.jpg)
![Inkscape SVG to FreeCAD](https://i.ytimg.com/vi/6LedIN5S2so/default.jpg)