Found in the Trash - Dresser Restoration

I found this dresser at the side of the road. It was in poor shape, with flaking finish, wobbly legs and failing joints. The whole thing was quite rough and needed some much needed TLC. I disassembled the entire dresser into it's individual pieces, removed all of the existing finish and gave every piece a thorough sanding. My restoration efforts uncovered a lovely solid hardwood dresser, which turned out much better than I had hoped. I replaced the drawer bottoms with new birch plywood, and replaced the old handles with new black solid metal handles. The whole unit is now remarkably solid, and I'm certain it will survive for decades to come!

I used a few tools in this restoration process, all found below...

Bahco 665 Carbide Scraper (THE BEST): https://amzn.to/3rGB9Dg
Milwaukee drill: https://amzn.to/2ZXdiTo
Wood Glue: https://amzn.to/2I9k9i5
Palm Sander: https://amzn.to/2EfrLCa
Tape measure: https://amzn.to/2rumH38
Pipe Clamps: https://amzn.to/2Wmo5Xb
Table saw: https://amzn.to/2KXkUwe
Robertson #2 bits: https://amzn.to/3dKVzD3
Estwing soft-faced hammer: https://amzn.to/3pwaHKQ
Stanley Square - https://amzn.to/2LGe9zE
Dewalt speed square: https://amzn.to/38NdjNE

Видео Found in the Trash - Dresser Restoration канала PatonHaus