How to Make copper tags for your pup!

I used a short length of 1/2" copper pipe, hammered flat and traced out two circle roughly 1 inch in diameter. I stamped "Gary" and "124 Conch St." onto the tags, though stamping in a phone number would be just as easy. Using a length of electrical tape is very helpful to keep alignment. I cut out the tags with sheet metal snips, filed the edges smooth and gave them a light sanding. I used a sharpie to fill in the stamped letters and sanded off the excess.

The letter and number punches I use in this video are very high quality. If you want to buy some for yourself you can find them here:

Small punches (3/32"): https://amzn.to/2XtA9CG
Large punches (1/4"): https://amzn.to/2GrE1gP
Wiss Tin Snips: https://amzn.to/2YMB8ON
Steel bench block : https://amzn.to/36sqm4I

Видео How to Make copper tags for your pup! канала PatonHaus