3D Printed Reverse Light for Kubota Tractor L2501 - DIY for under $10

Sorry the tractors engine is slightly loud at times in the beginning and at the ending, I forgot to adjust volume levels. Thanks for watching on @kurtscottage I built a reverse light / spot light for the Kubota L2501 tractor. I designed the lights body on Tinkercad than printed it on my Ender 3 pro 3D printer. I'm showing the complete build ASMR also showing how well the light works at night. The bulb I'm using is a 5 watt LED chip, the voltage of the chip is 14v so I used a boost converter module to boost the voltage of the battery pack from 3.7v to 14v. I used two cheap 18650 lithium batteries and spot welded them into a battery pack using a cheap spot welder board. As for a heat sink for the LED I used a heat sink from an old TV that I cut into pieces. All the parts in this build can be found online on sites like ebay and others, I usually buy the parts in lots of five. Total cost of the light was around five dollars. If you need more info or help with 3D printing and printers, how to use tinkercad, thingivers, the slicer program, stl files and other, I can make some videos explaining more in detail. I'm new to 3D printing but it's actually very easy, and is a really fun hobby.
The music in this video is from the YT copyright free music library (Instance Crush -Corbyn Kites) (Lets Do This! - Nat Keefe & Hot Buttered Rum)   When the weather gets better I will be working on many new larger projects and DIY's so please bare with me. Thanks again to all my Subscribers and Take Care. @kurtscottage the place of all things Homemade, DIY and Outdoors

Видео 3D Printed Reverse Light for Kubota Tractor L2501 - DIY for under $10 канала kurtscottage