#1 Jigsaw Blade for CLEAN PLYWOOD CUTS! (Try this Jigsaw Cutting Approach...)

Check Out Our Free Guide: *10 WORST POWER TOOL MISTAKES!!*
https://www.thehonestcarpenter.com/

Learn Power Tools Today with *POWER TOOLS EXPLAINED!:*
https://www.thehonestcarpenter.com/power-tools-explained

AFFILIATE TOOL LINKS:
Diablo Reverse Cut Jigsaw Blades 5 pc.:
https://amzn.to/47xtDz0
Bosch "Clean for Wood" Downcut Blades 5 pc.:
https://amzn.to/3ueTxJj
Bosch Carbide Laminate Blade 3 pc.:
https://amzn.to/49Om5tE
Diablo Fine Laminate Blade:
https://amzn.to/3unHnhe
Porter Cable 6.0-amp Jigsaw:
https://amzn.to/3FZe5s3
Black + Decker 5-amp Jigsaw:
https://amzn.to/40BWikd
Dewalt 20v Max XR jigsaw (Tool Only):
https://amzn.to/46hzqra

(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)

#1 Jigsaw Blade for CLEAN PLYWOOD CUTS! (Try this Jigsaw Cutting Approach...)

Cutting plywood with a jigsaw can get messy. Most jigsaw blades have upward-pointing teeth, which means that the teeth rip aggressively on the upstroke.

The problem with is that the blades will often shred the top layer of lumber, especially sensitive plywood veneers!

There are several tips for avoiding this...but the easiest one by far is to use a REVERSE CUT blade, or DOWNCUT blade.

These jigsaw blades have downward pointing teeth, which are much gentler on the top layers of the board.

Keep in mind, you will still get blowout on the backside of the board. To avoid this on BOTH sides of the board, consider using a LAMINATE blade.

These jigsaw blades often have teeth pointing in both directions, designed to preserve both faces as much as possible.

Thanks for watching!
The Honest Carpenter

Видео #1 Jigsaw Blade for CLEAN PLYWOOD CUTS! (Try this Jigsaw Cutting Approach...) канала The Honest Carpenter