Use Stepladders THE RIGHT WAY! (My System For Working Off Stepladders ALONE...)
Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Werner 6' Stepladder:
https://amzn.to/3AVxyHH
Bosch Bulldog Xtreme Hammer Drill 1":
https://amzn.to/3HiIbYz
Dewalt 20v Max Drill/Driver Combo:
https://amzn.to/3Hneq8Y
Huepar 2-Line Laser Level:
https://amzn.to/44fyCU3
Base Camp Dust Mask:
https://amzn.to/3HmwsrU
ATS Acoustic Panel 24x48":
https://amzn.to/3NmFkRZ
Tapcon Concrete Screws 1-3/4" x 1/4":
https://amzn.to/3NmMOVb
(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)
Use Stepladders THE RIGHT WAY! (How To Work Off Stepladders EFFICIENTLY...)
Working alone on stepladders can be a serious pain. This short video from The Honest Carpenter will show you a simple system for working on stepladders by yourself efficiently!
1. If you're going to be on the ladder for a while, TAKE OFF THE TOOL BELT
2. Use hooks on all of your tools!
3. Keep all relevant tools with you on the ladder--but no extras!
4. Get your position and setup figured out before you take anything up the ladder
5. Don't lay heavy tools on top of the stepladder--they can fall!
6. Use the cut-outs and holes on top of the ladder for small tool storage.
7. Use the spreader bars as a location for hangable tools.
I was hanging new sound panels in the shop here--let me know what you think of the audio down in the comments!
Thanks for watching!
The Honest Carpenter
Видео Use Stepladders THE RIGHT WAY! (My System For Working Off Stepladders ALONE...) канала The Honest Carpenter
https://www.thehonestcarpenter.com/
AFFILIATE TOOL LINKS:
Werner 6' Stepladder:
https://amzn.to/3AVxyHH
Bosch Bulldog Xtreme Hammer Drill 1":
https://amzn.to/3HiIbYz
Dewalt 20v Max Drill/Driver Combo:
https://amzn.to/3Hneq8Y
Huepar 2-Line Laser Level:
https://amzn.to/44fyCU3
Base Camp Dust Mask:
https://amzn.to/3HmwsrU
ATS Acoustic Panel 24x48":
https://amzn.to/3NmFkRZ
Tapcon Concrete Screws 1-3/4" x 1/4":
https://amzn.to/3NmMOVb
(Please Note: These are Amazon affiliate links. When you shop through these links, we receive a small commission at NO EXTRA CHARGE TO YOU!)
Use Stepladders THE RIGHT WAY! (How To Work Off Stepladders EFFICIENTLY...)
Working alone on stepladders can be a serious pain. This short video from The Honest Carpenter will show you a simple system for working on stepladders by yourself efficiently!
1. If you're going to be on the ladder for a while, TAKE OFF THE TOOL BELT
2. Use hooks on all of your tools!
3. Keep all relevant tools with you on the ladder--but no extras!
4. Get your position and setup figured out before you take anything up the ladder
5. Don't lay heavy tools on top of the stepladder--they can fall!
6. Use the cut-outs and holes on top of the ladder for small tool storage.
7. Use the spreader bars as a location for hangable tools.
I was hanging new sound panels in the shop here--let me know what you think of the audio down in the comments!
Thanks for watching!
The Honest Carpenter
Видео Use Stepladders THE RIGHT WAY! (My System For Working Off Stepladders ALONE...) канала The Honest Carpenter
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
#1 Easiest Trick to DRILL STRAIGHT! (Drill at Perfect 90 Degrees...Fastest Method!)7 Most CONTROVERSIAL CUTTING Techniques in Carpentry + Woodworking! (Safe or Not Safe?!)Make SANDPAPER Last Longer! (5 TIPS + HACKS To Save Money On Sandpaper)$0 vs. $90 Table Saw MITER GAUGE! (Buy a Fancy Miter Gauge...or UPGRADE YOUR OWN?!)Fix Bent Sawzall Blades! #shorts #carpentry #constructionThis UNNOTICED Screw Detail Makes a Big Difference! (COARSE THREAD vs. FINE THREAD)99% of People Don't Know This Simple Woodworking Term! (Lumber Terminology)I Never Knew This TRICK About the OSCILLATING MULTITOOL?!You Don't Need a Full-Sized Router! (Try This Instead...)#1 Table Saw Feature! (How I Chose My Replacement For My Old Table Saw)Summer Was Crazy...But I'm Glad To Be Back!How To Remove RUSTED, ROUNDED, STRIPPED BOLTS And NUTS!! (Bolt Extractor And Breaker Bar...2 TESTS!)Here's How Brush Tools Really Work!I Love This HANDLE MAGNET!YouTube is NOT The Best Way To Learn Carpentry...SO I'M STARTING THIS INSTEAD!Chip Splinters Under Fingernails = NO FUN!Copper Tube Cutters! (What they are/How to use...)Drills Can Break Wrists...DON'T DO THESE THINGS! #shorts #diy #carpentryWhat CELERY Can Teach You About WOOD...A Beginners Guide To Carpentry And Woodworking!This 1-MINUTE DOOR FIX Can Solve RATTLING DOORS!! (#1 Door Strike Plate Trick)