Keyless Enter 'N Go™ | How To | 2020 Dodge Charger
The Keyless Enter 'N Go™ feature lets you control your power locks via the keyless entry car remotes. The car fob or key fob provides keyless entry of your 2020 Dodge Charger. Car unlock has never been faster or easier. Learn more in this helpful video.
Transcript
[music playing]
Keyless Enter ‘N Go lets you lock or unlock the doors and trunk and start or shut down your engine without ever touching your key fob, as long as the fob can be detected by the vehicle.
To lock or unlock either of the front doors, you’ll need to have the key fob on your person, within 5 feet or 1.5 meters of the handle in use. Grab the handle and the door will unlock.
Likewise, to unlock the trunk, just push the button on the right side of the deck lid.
To lock all the doors, push either of the lock buttons located on the outside of the front door handles.
[Text on screen] Key fob must be outside the vehicle.
[Voice over] Be careful not to grab the handle, or you could activate the unlock sensor and accidentally unlock the door.
You can also lock the doors with the lock button on the interior door panel or with the lock button on the key fob.
[Text on screen] Key fob must be inside the vehicle.
[Voice over] To start the engine, make sure the transmission’s in Park. Then press and hold the brake pedal while pushing the Engine Start/Stop button and you’re good to go. To turn off the engine, come to a complete stop, shift into Park, then push and release the Engine Start/Stop button. To use accessories without starting the vehicle, don’t press the brake pedal. Instead, just push the Engine Start/Stop button once to enter the Accessories, or ACC, position. From there, you can activate the radio, wipers and windows. Push the button a second time to enter the On/Run position so you can activate the instrument cluster and certain climate controls.
[Text on screen] To avoid battery drain, always return the ignition to the Off/Lock position.
Push the button a third time to return to the Off/Lock position.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
[Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Dodge and Mopar are registered trademarks of FCA US LLC.
Видео Keyless Enter 'N Go™ | How To | 2020 Dodge Charger канала Mopar
Transcript
[music playing]
Keyless Enter ‘N Go lets you lock or unlock the doors and trunk and start or shut down your engine without ever touching your key fob, as long as the fob can be detected by the vehicle.
To lock or unlock either of the front doors, you’ll need to have the key fob on your person, within 5 feet or 1.5 meters of the handle in use. Grab the handle and the door will unlock.
Likewise, to unlock the trunk, just push the button on the right side of the deck lid.
To lock all the doors, push either of the lock buttons located on the outside of the front door handles.
[Text on screen] Key fob must be outside the vehicle.
[Voice over] Be careful not to grab the handle, or you could activate the unlock sensor and accidentally unlock the door.
You can also lock the doors with the lock button on the interior door panel or with the lock button on the key fob.
[Text on screen] Key fob must be inside the vehicle.
[Voice over] To start the engine, make sure the transmission’s in Park. Then press and hold the brake pedal while pushing the Engine Start/Stop button and you’re good to go. To turn off the engine, come to a complete stop, shift into Park, then push and release the Engine Start/Stop button. To use accessories without starting the vehicle, don’t press the brake pedal. Instead, just push the Engine Start/Stop button once to enter the Accessories, or ACC, position. From there, you can activate the radio, wipers and windows. Push the button a second time to enter the On/Run position so you can activate the instrument cluster and certain climate controls.
[Text on screen] To avoid battery drain, always return the ignition to the Off/Lock position.
Push the button a third time to return to the Off/Lock position.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
[Text on screen] Copyright 2020 FCA US LLC. All Rights Reserved. Dodge and Mopar are registered trademarks of FCA US LLC.
Видео Keyless Enter 'N Go™ | How To | 2020 Dodge Charger канала Mopar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
ParkSense® Active Park Assist | How To | 2022 Jeep CherokeeInstrument Cluster Display/Night Vision/Change Oil Message | How To | 2022 Wagoneer/Grand WagoneerLaneSense® | How To | 2022 Chrysler, Dodge, Jeep, Ram & Fiat VehiclesKey Fob | How To | 2022 Ram Chassis CabFour Wheel Drive Operation - Four Position | How To | 2022 Jeep Wrangler/GladiatorKey Fob Battery Replacement | How To | 2020 Jeep RenegadeElectronic Front Sway Bar Disconnect | How To | 2020 Jeep WranglerInstrument Cluster Display / Night Vision / Change Oil Message | How To | 2022 Jeep Grand Cherokee LParkSense® Active Park Assist | How To | 2021 Jeep CherokeeDriver Memory Settings | How To | 2020 Dodge ChargerChange Oil Message | How To | 2020 Dodge ChallengerAxle Lock | How To | 2020 Ram 1500 DTFour Wheel Drive Operation - Four Position | How To | 2023 Jeep Wrangler/GladiatorAir Suspension, 4-Corner | How To | 2022 Ram 1500 DTFour Wheel Drive Operation - Five Position | How To | 2020 Ram 1500 DTFour Wheel Drive Operation | How To | 2022 Ram TrucksWipers and Lights | How To | 2021 Jeep GladiatorParkSense® Active Park Assist | How To | 2021 Chrysler Pacifica & Pacifica HybridFour Wheel Drive Operation-Five Position-4x4 4WD transfer case on 2018 Jeep WranglerKey Fob Battery Replacement | How To | 2020 Jeep Wrangler