Electronic Front Sway Bar Disconnect | How To | 2020 Jeep Wrangler
Ready to go off road? The swar bar feature on your 2020 Jeep Wrangler provides ideal front suspension for all-terrain driving. Learn how to disconnect the sway bar, as well as the conditions that prompt sway bar link.
Transcript
[music playing]
If equipped, you can disconnect the electronic sway bar for greater front suspension travel in off-road situations.
You’ll find the Sway Bar switch on the instrument panel, to the right of the steering column. To disconnect the sway bar, shift to either 4 Hi or 4 Low and push the switch. You’ll see the indicator light up in the instrument cluster when it disconnects.
The light will flash until it’s disconnected, or if activation conditions are not met.
The sway bar provides stability and maintains control of the vehicle. Keep it connected during normal on-road driving.
Do not disconnect the sway bar and drive on hard-surfaced roads or at speeds above 18 mph, 29 km/h, or you could lose control of the vehicle, which can result in serious injury.
To return to on-road mode, push the Sway Bar switch again.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
Видео Electronic Front Sway Bar Disconnect | How To | 2020 Jeep Wrangler канала Mopar
Transcript
[music playing]
If equipped, you can disconnect the electronic sway bar for greater front suspension travel in off-road situations.
You’ll find the Sway Bar switch on the instrument panel, to the right of the steering column. To disconnect the sway bar, shift to either 4 Hi or 4 Low and push the switch. You’ll see the indicator light up in the instrument cluster when it disconnects.
The light will flash until it’s disconnected, or if activation conditions are not met.
The sway bar provides stability and maintains control of the vehicle. Keep it connected during normal on-road driving.
Do not disconnect the sway bar and drive on hard-surfaced roads or at speeds above 18 mph, 29 km/h, or you could lose control of the vehicle, which can result in serious injury.
To return to on-road mode, push the Sway Bar switch again.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
Видео Electronic Front Sway Bar Disconnect | How To | 2020 Jeep Wrangler канала Mopar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Windshield Wiper/Washer Operation | How To | 2019 Jeep RenegadeParkSense® Rear Park Assist | How To | 2020 Dodge ChargerPower Sunroof - How to operate the sun roof on 2017 Jeep Grand CherokeeParkSense® Active Park Assist | How To | 2022 Jeep CherokeeKeyless Enter 'N Go™ | How To | 2019 Jeep RenegadeCharging Your Vehicle-How to charge a car battery on 2017 Fiat 500eCustomer Programmable Features | How To | 2020 Ram 1500 DTInstrument Cluster Display/Night Vision/Change Oil Message | How To | 2022 Wagoneer/Grand WagoneerLaneSense® | How To | 2022 Chrysler, Dodge, Jeep, Ram & Fiat VehiclesBlind Spot Monitoring-Learn about the blind spot monitor on your 2018 Jeep Grand CherokeeKey Fob | How To | 2022 Ram Chassis CabFour Wheel Drive Operation - Four Position | How To | 2022 Jeep Wrangler/GladiatorKey Fob Battery Replacement | How To | 2020 Jeep RenegadeAutoStick | How To | 2019 Dodge ChargerParkSense® Active Park Assist | How To | 2021 Jeep CherokeeChange Oil Message | How To | 2020 Dodge ChallengerAxle Lock | How To | 2020 Ram 1500 DTFour Wheel Drive Operation - Four Position | How To | 2023 Jeep Wrangler/GladiatorFour Wheel Drive Operation - Five Position | How To | 2020 Ram 1500 DTRamBox-How to use truck bed storage on 2018 Ram Truck