Workbench JAM PACKED with Functionality // Part 3
To start comparing quotes and simplify insurance-buying check out Policygenius: https://policygenius.com/shopnation Thanks to Policygenius for sponsoring this video!
Full Color Plans: https://bit.ly/3QWVIbE
Smaller "Shmedium" Version Full Color Plans: https://bit.ly/3QVWciv
More Shop Greatness Products: https://shopnationstore.com
We continue on with Part 3 of the "Versatile Workbench" build. In this video we build the drawer storage insert, the router table insert, and install the electrical and dust collection system.
For the inserts I'm just following the plans that lay out the construction step-by-step. Once those are complete I set them aside so I can install the electrical system. This is important because this design is so compact that you actually need the room to be able to access the areas where wires and hoses are run. It is also worth noting that the electrical system is all plug and play meaning you don't have to do any actual wiring (if you don't want to). This makes things approachable and quick to tackle.
The dust collection system is a very compact solution for this workbench. It features a Vacmaster "beast" vacuum which was selected based on it's tiny footprint and massive 5.5 peak hp output. This is paired with a Dust Right separator which will remove the solids from the system. All of that is connected to a total of 3 blast gates around the workbench which act as aux hook ups for hand tools as well as providing dust collection to the router table.
With the core system installed the last step was just to install the inserts into their slots. This build is coming along very nicely and all that is left at this point are the finishing touches like door/drawer fronts, face frame, and glorious paint!
Affiliate Links (help support the channel!):
Supplies:
12" Drawer Slides (2-pack) - https://amzn.to/2Nrbsap
22" Drawer Slides (5-pack) - https://amzn.to/3iAQ9yr
Vacmaster "Beast" Small Vacuum - https://amzn.to/2MaCHWb
Dust Right Separator - https://amzn.to/3qGWHyC
2-1/2" Dust Collection Hose (20') - https://amzn.to/3qLircn
iVac Pro Switch - https://amzn.to/3qHZ445
Heavy Duty Surge Protector - https://amzn.to/3sPcKfp
Flush-Mount Power Strip - https://amzn.to/362v5Mg
AC Port Plug (incoming power) - https://amzn.to/3qIfc5O
Kreg Precision Router Lift - https://amzn.to/3cGqEes
3-Machine Dust Collection Kit - https://amzn.to/3jf6wRR
TAFCO Organizer Bin - https://low.es/3tObImK
Tools:
Dust Right Wall Mounted Dust Collector - https://bit.ly/3qyAsdq
Dust Right Canister Filter (1 micron) - https://bit.ly/3ruj4YK
Incra T-Rule (6") - https://amzn.to/3oO7w08
Incra T-Rule (3") - https://amzn.to/2YKBqIc
Woodpeckers 24" T-Square - https://bit.ly/2Mp3OgF
Woodpeckers 12" T-Square - https://amzn.to/2YGfC0x
Best Maker's Mechanical Pencil: https://amzn.to/3oIstee
Rigid Jig-Saw: https://homedepot.sjv.io/3QqBy
Rigid Impact Driver: https://homedepot.sjv.io/dBP23
Rigid Airless Brad Nailer: https://homedepot.sjv.io/AQ1YN
Rigid Airless Finish Nailer: https://homedepot.sjv.io/91vgW
DeWalt 12" DWS715 Miter Saw: https://amzn.to/3lScKqX
Kreg ACS Table: https://amzn.to/34PpQ2h
Kreg Track Saw: https://amzn.to/3mI3UMK
Kreg ACS Bundle: https://amzn.to/35TqgEl
Laguna F2 Table Saw - https://bit.ly/2NSNRzw
My Shoes: https://amzn.to/2OUUfqU
Shop Nation Links:
----------------------------------------------------
Shop Nation Website: https://www.shopnationstore.com
Instagram (@dreamshopnation): https://www.instagram.com/dreamshopnation
Timberland Pro: https://bit.ly/ShopNation_TimberlandPro
Patreon: https://patreon.com/ShopNation
#workbench #workbenchbuild #shoporganization
Видео Workbench JAM PACKED with Functionality // Part 3 канала Shop Nation
Full Color Plans: https://bit.ly/3QWVIbE
Smaller "Shmedium" Version Full Color Plans: https://bit.ly/3QVWciv
More Shop Greatness Products: https://shopnationstore.com
We continue on with Part 3 of the "Versatile Workbench" build. In this video we build the drawer storage insert, the router table insert, and install the electrical and dust collection system.
For the inserts I'm just following the plans that lay out the construction step-by-step. Once those are complete I set them aside so I can install the electrical system. This is important because this design is so compact that you actually need the room to be able to access the areas where wires and hoses are run. It is also worth noting that the electrical system is all plug and play meaning you don't have to do any actual wiring (if you don't want to). This makes things approachable and quick to tackle.
The dust collection system is a very compact solution for this workbench. It features a Vacmaster "beast" vacuum which was selected based on it's tiny footprint and massive 5.5 peak hp output. This is paired with a Dust Right separator which will remove the solids from the system. All of that is connected to a total of 3 blast gates around the workbench which act as aux hook ups for hand tools as well as providing dust collection to the router table.
With the core system installed the last step was just to install the inserts into their slots. This build is coming along very nicely and all that is left at this point are the finishing touches like door/drawer fronts, face frame, and glorious paint!
Affiliate Links (help support the channel!):
Supplies:
12" Drawer Slides (2-pack) - https://amzn.to/2Nrbsap
22" Drawer Slides (5-pack) - https://amzn.to/3iAQ9yr
Vacmaster "Beast" Small Vacuum - https://amzn.to/2MaCHWb
Dust Right Separator - https://amzn.to/3qGWHyC
2-1/2" Dust Collection Hose (20') - https://amzn.to/3qLircn
iVac Pro Switch - https://amzn.to/3qHZ445
Heavy Duty Surge Protector - https://amzn.to/3sPcKfp
Flush-Mount Power Strip - https://amzn.to/362v5Mg
AC Port Plug (incoming power) - https://amzn.to/3qIfc5O
Kreg Precision Router Lift - https://amzn.to/3cGqEes
3-Machine Dust Collection Kit - https://amzn.to/3jf6wRR
TAFCO Organizer Bin - https://low.es/3tObImK
Tools:
Dust Right Wall Mounted Dust Collector - https://bit.ly/3qyAsdq
Dust Right Canister Filter (1 micron) - https://bit.ly/3ruj4YK
Incra T-Rule (6") - https://amzn.to/3oO7w08
Incra T-Rule (3") - https://amzn.to/2YKBqIc
Woodpeckers 24" T-Square - https://bit.ly/2Mp3OgF
Woodpeckers 12" T-Square - https://amzn.to/2YGfC0x
Best Maker's Mechanical Pencil: https://amzn.to/3oIstee
Rigid Jig-Saw: https://homedepot.sjv.io/3QqBy
Rigid Impact Driver: https://homedepot.sjv.io/dBP23
Rigid Airless Brad Nailer: https://homedepot.sjv.io/AQ1YN
Rigid Airless Finish Nailer: https://homedepot.sjv.io/91vgW
DeWalt 12" DWS715 Miter Saw: https://amzn.to/3lScKqX
Kreg ACS Table: https://amzn.to/34PpQ2h
Kreg Track Saw: https://amzn.to/3mI3UMK
Kreg ACS Bundle: https://amzn.to/35TqgEl
Laguna F2 Table Saw - https://bit.ly/2NSNRzw
My Shoes: https://amzn.to/2OUUfqU
Shop Nation Links:
----------------------------------------------------
Shop Nation Website: https://www.shopnationstore.com
Instagram (@dreamshopnation): https://www.instagram.com/dreamshopnation
Timberland Pro: https://bit.ly/ShopNation_TimberlandPro
Patreon: https://patreon.com/ShopNation
#workbench #workbenchbuild #shoporganization
Видео Workbench JAM PACKED with Functionality // Part 3 канала Shop Nation
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
I'll NEVER need a crosscut sled again...Why don’t more houses come with this? // Pantry Part 2Easy DIY Sanding Organizer! // Shop OrganizationMy Wife is Hilarious // Shop Talk Ep. 4 🎁I turned an old closet into this \\ Part 2The Shop Nation expansionThe windows and doors don't fit! // Shed Part 5Stop using your table saw like this!I have an idea for my KREG ACS // Part 1Am I going too far with this shed? // Shed Part 8This Workbench might be too nice for a shop... // Part 4Not sure I would do this again // Custom Aluminum Router FenceWEN 4225 Drill Press Review // Budget Drill PressI'm Going Full Time on YouTubePlanning out my dream shopUltimate Workbench Build FINISHED! // Part 4Improve the Workflow in Your Shop! // Shop Organization (Easy)This might work better than I thought // Part 2DIY Shop Towel Cabinet Build // Shop OrganizationI tried installing a metal roof for the first time… // Shed Part 4