Get setup to take your first measurement in Smaart8 [GSwSST8]
If you just installed Smaart8 for the first time, this video will walk you through all of the initial settings to get your first measurement going.
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
START HERE - https://www.sounddesignlive.com/start-here/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео Get setup to take your first measurement in Smaart8 [GSwSST8] канала Nathan Lively
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
START HERE - https://www.sounddesignlive.com/start-here/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео Get setup to take your first measurement in Smaart8 [GSwSST8] канала Nathan Lively
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How loud does the test signal need to be in the room for Smaart? [GSwSST20]How To Read The Phase Trace in SmaartHow to take fast impulse response measurements in Smaart© without pissing people offSmaart: Optimal settings to avoid micromanagement [GSwSST8.1]What is front to back distance ratio?How do I know if I have good data? Check your physical IO [GSwSST13]Quick Line Array Tuning Level & EQ in Smaart®Expectations: How do you measure an EQ in Smaart? [GSwSST24]How to find a polarity inversion using Smaart® [GSwSST32]Smaart v8 Quickstart - Initial ConfigurationHow to set your microphone preamps for Smaart [GSwSST17]How to phase align main+sub in Smaart® [GSwSST34.1]How do you use SubAligner with end-fire arrays?How to find a speaker measurement's slope in SmaartHow to build an audio analyzer the wrong way [GSwSST2]How to Time Align Your Main to Your Front Fill Using Smaart® Live IRPHASE ALIGNMENT VS TIME ALIGNMENT SMAART V8 5betaDouble check your settings in Smaart v8 before you start work in the field [GSwSST16]