How to take fast impulse response measurements in Smaart© without pissing people off
Some investigation in the available settings in the IR module in Smaart.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео How to take fast impulse response measurements in Smaart© without pissing people off канала Nathan Lively
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео How to take fast impulse response measurements in Smaart© without pissing people off канала Nathan Lively
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Measure Room Modes and Standing Waves with Smaart®Smaart v8 Training - Pink Noise vs SweepsImpulse Responses 101:- What are they? The BasicsSmaart Operator Fundamentals Online: 11 - Impulse Response Measurements and IR ModeMatched SlopesGetting Started with Smaart for System TuningHow to find a polarity inversion using Smaart® [GSwSST32]How do I use an Impulse Response for Awesome Guitar Tone? | SMG BASICSHow to Time Align Your Main to Your Front Fill Using Smaart® Live IRHow to set the limiter threshold on a DBX PA2 so you don't blow your speakers upTutorial: Understanding Phase - Part 1Smaart V8 An example Where to time align your delay speakers to10 Minute Crash Course: Spectrum vs Transfer Function Measurements in SmaartQuick Line Array Tuning Level & EQ in Smaart®Guitar Speaker Cabinet IRs - How to Make an Impulse ResponseGet setup to take your first measurement in Smaart DI [GSwSST7]How to verify main+sub alignment in Smaart® [GSwSST34]9 Smaart® shortcuts that will make your life easierImpulse Measurement and Time Alignment using Systune, Smaart7, and REW