How to Time Align Your Main to Your Front Fill Using Smaart® Live IR
Full instructions: https://www.sounddesignlive.com/how-to-time-align-your-main-to-your-front-fill-using-smaart-live-ir/
1. Set relative solo level and EQ for Main and Front-fill at on-axis positions.
2. Find the acoustic crossover point.
3. Set delay.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
Видео How to Time Align Your Main to Your Front Fill Using Smaart® Live IR канала Nathan Lively
1. Set relative solo level and EQ for Main and Front-fill at on-axis positions.
2. Find the acoustic crossover point.
3. Set delay.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
Видео How to Time Align Your Main to Your Front Fill Using Smaart® Live IR канала Nathan Lively
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How to phase align main+sub in Smaart® [GSwSST34.1]](https://i.ytimg.com/vi/5leb1k4LUA0/default.jpg)
![Sound System Tuning By Ear](https://i.ytimg.com/vi/1IbvhgfGEhU/default.jpg)
![Time aligning speakers using Smaart and a Behringer X32](https://i.ytimg.com/vi/R_G4wrX1nk4/default.jpg)
![How to maximize gain before feedback of a podium microphone using Smaart®](https://i.ytimg.com/vi/8zxMheUiCHc/default.jpg)
![10 Minute Crash Course: Spectrum vs Transfer Function Measurements in Smaart](https://i.ytimg.com/vi/uU8V5PkeoQg/default.jpg)
![Getting Started with Smaart for System Tuning](https://i.ytimg.com/vi/B5j9t1JwfJ4/default.jpg)
![How to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer Function](https://i.ytimg.com/vi/s3fv1RdxOXM/default.jpg)
![How to Measure Room Modes and Standing Waves with Smaart®](https://i.ytimg.com/vi/0mbRtcT7WnE/default.jpg)
![Get setup to take your first measurement in Smaart DI [GSwSST7]](https://i.ytimg.com/vi/70tX-cb_EVA/default.jpg)
![Smaart Operator Fundamentals Online: 1 - Let's Start At The Very Beginning](https://i.ytimg.com/vi/eIETg8BZe1Y/default.jpg)
![Which audio interface is best for a Smaart rig? [GSwSST5]](https://i.ytimg.com/vi/Q6mHUzOvB5g/default.jpg)
![Using Smaart V8 to phase align subs to mains](https://i.ytimg.com/vi/HjJJuTHXjY8/default.jpg)
![How to take fast impulse response measurements in Smaart© without pissing people off](https://i.ytimg.com/vi/DVuh6delD_A/default.jpg)
![How To Read The Phase Trace in Smaart](https://i.ytimg.com/vi/HXVYGZCXE3I/default.jpg)
![Mixing with Smaart](https://i.ytimg.com/vi/RK28MJJ_qgA/default.jpg)
![Phase alignment example](https://i.ytimg.com/vi/7x207VadcoI/default.jpg)
![How to verify main+sub alignment in Smaart® [GSwSST34]](https://i.ytimg.com/vi/KrtjzzyB9g8/default.jpg)
![Where do I place my measurement mics to EQ a line array?](https://i.ytimg.com/vi/4n8aCFTr5-w/default.jpg)
![Subwoofer Alignment: 1 Method That Works Every Time](https://i.ytimg.com/vi/0YWdMK6H1HI/default.jpg)
![9 Smaart® shortcuts that will make your life easier](https://i.ytimg.com/vi/dU3JWzYqTjA/default.jpg)