How to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer Function
In this video I show you how to route Smaart V8 into a Digital Audio Interface. The interface I used was a Behringer UMC404HD. The 2 mics used were Dayton EMM6 RTA microphones, with calibration files. (Higher accuracy). The mixer used was a Behringer X32 full sized digital console.
Digital Audio Interface: UMC404HD (supplying phantom power to RTA mics)
Input 1 - RTA mic # 10282
Input 2 - RTA mic # 10951
Input 3 - (not used)
Input 4 - Input from X32 Bus output #6
Output 1 - (pink noise) Channel 1 to X32's input channel #31
Outputs 2,3,4 (not used)
Behringer X32
Input - Channel 31, (pink noise input from Smaart, thru the UMC404HD)
Outputs:
Matrix 1 - Main Left D&B Q1's (x4)
Matrix 2 - Main Center Left QSC KLA 12's (x2)
Matrix 3 - Main Center Right QSC KLA 12's (x2)
Matrix 4 - Main Right D&B Q1's (x4)
Matrix 5 - Center Fills Meyer UPM-1P (X2)
Matrix 6 - Subs JBL Vertex 4888 (x2)
Bus 6 - Channel #31's output for reference (same as a standard Left or Right output)
I also show you how to setup the Smaart input and output routing to make it all work. Let me know if I can help further!
Видео How to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer Function канала Donovan Cline
Digital Audio Interface: UMC404HD (supplying phantom power to RTA mics)
Input 1 - RTA mic # 10282
Input 2 - RTA mic # 10951
Input 3 - (not used)
Input 4 - Input from X32 Bus output #6
Output 1 - (pink noise) Channel 1 to X32's input channel #31
Outputs 2,3,4 (not used)
Behringer X32
Input - Channel 31, (pink noise input from Smaart, thru the UMC404HD)
Outputs:
Matrix 1 - Main Left D&B Q1's (x4)
Matrix 2 - Main Center Left QSC KLA 12's (x2)
Matrix 3 - Main Center Right QSC KLA 12's (x2)
Matrix 4 - Main Right D&B Q1's (x4)
Matrix 5 - Center Fills Meyer UPM-1P (X2)
Matrix 6 - Subs JBL Vertex 4888 (x2)
Bus 6 - Channel #31's output for reference (same as a standard Left or Right output)
I also show you how to setup the Smaart input and output routing to make it all work. Let me know if I can help further!
Видео How to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer Function канала Donovan Cline
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Smaart V8 - An example: Where to time align your delay speakers to...Using Smaart to EQ a room on a Behringer X32Controlling Feedback With Studiolive and SmaartWhat's in my Audio Workbox? Let's take a look!Using Smaart V8 to phase align subs to mainsEQing Live DrumsSmaart Operator Fundamentals Online: 3 - Using the Data Bar, Intro to Smaart Di v2Stop Smaarting the Sound System [30-min training]How I Route Shows - X32 Advanced ExampleMidas M32 Firmware v4.00 - Update and OverviewHow to route a Behringer X32 to Smaart V8How do I know if I have good data? Check your physical IO [GSwSST13]Smaart Basics: Example System OverviewSmaart - sub woofer alignment with Keith MorrisUsing Pink Noise and the Built-In RTA to Ring Out Your RoomDrum EQ Techniques | Drum EQ Live Presets for Fast Drum SoundsTime aligning speakers using Smaart and a Behringer X32Where do I phase align a center sub?Which audio interface is best for a Smaart rig? [GSwSST5]