How to Measure Room Modes and Standing Waves with Smaart®
Full article: https://www.sounddesignlive.com/how-to-measure-and-treat-resonances-like-room-modes-and-standing-waves-with-smaart/
Room modes can make your mix sound flabby and are most prevalent in small rooms. A few properly placed notch filters can help and in this article I am going to show you how to measure your room and place the filters using Smaart.
Key Takeaways
1. Precisely placed notch filters can tighten up your mix, but it’s easy to overdo it. Listen and audition.
2. Smaart will not average multiple IR measurements. You’ll need to do that in another app.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
Видео How to Measure Room Modes and Standing Waves with Smaart® канала Nathan Lively
Room modes can make your mix sound flabby and are most prevalent in small rooms. A few properly placed notch filters can help and in this article I am going to show you how to measure your room and place the filters using Smaart.
Key Takeaways
1. Precisely placed notch filters can tighten up your mix, but it’s easy to overdo it. Listen and audition.
2. Smaart will not average multiple IR measurements. You’ll need to do that in another app.
___
Get Started with Sound System Tuning - https://www.sounddesignlive.com/get-started-with-sound-system-tuning/
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
_______________
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
Видео How to Measure Room Modes and Standing Waves with Smaart® канала Nathan Lively
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Room Modes 101 in 14 MinutesRoom Modes: Locations - www.AcousticFields.comHow to maximize gain before feedback of a podium microphone using Smaart®Smaart Operator Fundamentals Online: 11 - Impulse Response Measurements and IR ModeWhy is cross-firing your mains good, but sub overlap is bad?Bobby Owsinski - Improve the Sound of Your RoomRoom EQ Wizard: REW Room Measurement TutorialSound System Tuning Step-by-Step using TRACT and SmaartHow to use the right EQ shape every time with Smaart® [GSwSST31.4]How to set crossover filters in the field when the speakers are already in the airHome Project Studio - Treatment Series: E4 Taming & Measuring Low Bass Mode improvementsCreating the Best Handmade Acoustic Guitars | Engineering Guitar Tops10 Minute Crash Course: Spectrum vs Transfer Function Measurements in SmaartHow do I know if I have good data? Check your physical IO [GSwSST13]Home Project Studio - Treatment Series: E2 Understand your roomRoom Acoustics Analysis Following ISO 3382 Standards.Stop Smaarting the Sound System [30-min training]Smaart® Beta: Will the new filter control in the delay finder help with your main+sub alignment?Room EQ Wizard (REW) Tutorial - What's going on in my room? Measuring speakers.