How loud does the test signal need to be in the room for Smaart? [GSwSST20]
The next step in verifying that your audio analyzer is set up correctly is to make sure you have the proper signal level to get actionable data.
Download the Verification Checklist: https://www.sounddesignlive.com/verification-checklist/
___
Get Started with Sound System Tuning - https://www.youtube.com/playlist?list=PLsfnoBcHUm22FvFFlnnvaN7W4sl2DGTCl
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
START HERE - https://www.sounddesignlive.com/start-here/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео How loud does the test signal need to be in the room for Smaart? [GSwSST20] канала Nathan Lively
Download the Verification Checklist: https://www.sounddesignlive.com/verification-checklist/
___
Get Started with Sound System Tuning - https://www.youtube.com/playlist?list=PLsfnoBcHUm22FvFFlnnvaN7W4sl2DGTCl
___
SOUND SYSTEM TUNING ONLINE COURSE - https://www.proaudioworkshopseeingsound.com/
___
Books on sound system tuning - https://www.sounddesignlive.com/audio-engineer-training-programs/
Podcast for live sound engineers - https://www.sounddesignlive.com/pro-audio-podcast/
___
START HERE - https://www.sounddesignlive.com/start-here/
___
Be friendly
Facebook - https://www.facebook.com/sounddesignlive/
Twitter - https://twitter.com/nathandofrango
LinkedIn - https://www.linkedin.com/in/nathanlively/
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
Видео How loud does the test signal need to be in the room for Smaart? [GSwSST20] канала Nathan Lively
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to set your microphone preamps for Smaart [GSwSST17]Smaart: Optimal settings to avoid micromanagement [GSwSST8.1]What does a full-range speaker look like in Smaart? [GSwSST27]Expectations: How do you measure an EQ in Smaart? [GSwSST24]Stop Smaarting the Sound System [30-min training]How to find a polarity inversion using Smaart® [GSwSST32]How to set the delay locator to measure a subwoofer in Smaart [GSwSST29]Strange Signals & Weird Noises On Your Radio Scanner ExplainedHow to verify main+sub alignment in Smaart® [GSwSST34]Sound System Tuning Step-by-Step using TRACT and SmaartMatched SlopesWhich measurement microphone is best? [GSwSST3]Get setup to take your first measurement in Smaart8 [GSwSST8]How to create a target trace in Smaart [GSwSST25]EQ Masterclass - Every EQ Type ExplainedHow to phase align main+sub in Smaart® [GSwSST34.1]sub + top finalHow do I know if I have good data? Check your physical IO [GSwSST13]