Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

sub + top final

Phase alignment between a main and 2 subs in a end fired config. Also available on https://timobeckmangeluid.wordpress.com/2017/08/25/sub-top-alignment-delay-only/

Видео sub + top final канала Timo Beckman
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
25 августа 2017 г. 21:48:08
00:11:35
Timo Beckman
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
How to set the delay locator to measure a subwoofer in Smaart [GSwSST29]How to set the delay locator to measure a subwoofer in Smaart [GSwSST29]Using Smaart V8 to phase align subs to mainsUsing Smaart V8 to phase align subs to mainsPhase Align Parallel Sources Using Rational Acoustics SMARRTPhase Align Parallel Sources Using Rational Acoustics SMARRTEND FIRED DELTA TEND FIRED DELTA Tstudio monitor phase alignment and why with Keith Morrisstudio monitor phase alignment and why with Keith MorrisTECH: LIVE SOUND SUBS SUBWOOFER PLACEMENT & CONFIGURATION - LR, Center, Line, Cardioid, End FireTECH: LIVE SOUND SUBS SUBWOOFER PLACEMENT & CONFIGURATION - LR, Center, Line, Cardioid, End FirePhase alignment examplePhase alignment exampleA mix between a Gradient and End Fired Sub ArrayA mix between a Gradient and End Fired Sub ArrayWhat does a full-range speaker look like in Smaart? [GSwSST27]What does a full-range speaker look like in Smaart? [GSwSST27]All Pass vs delay elettronicoAll Pass vs delay elettronicoSound System Tuning Step-by-Step using TRACT and SmaartSound System Tuning Step-by-Step using TRACT and SmaartHow to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer FunctionHow to route Smaart V8 to any mixer using a Digital I/O Interface + RTA & Transfer FunctionHow To Read The Phase Trace in SmaartHow To Read The Phase Trace in SmaartSmaart - sub woofer alignment with Keith MorrisSmaart - sub woofer alignment with Keith Morrisend fired delay only copyend fired delay only copySMAART ARMONIA FIR DESIGNERSMAART ARMONIA FIR DESIGNERExpectations: How do you measure an EQ in Smaart? [GSwSST24]Expectations: How do you measure an EQ in Smaart? [GSwSST24]5 ideas to improve Main+Sub phase alignment with Smaart® [GSwSST35]5 ideas to improve Main+Sub phase alignment with Smaart® [GSwSST35]polarity vs delaypolarity vs delaySound Design Live : Smaart installation and first stepsSound Design Live : Smaart installation and first steps
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала