John Deere 400 Hydraulic Motor Disassembly | Sundstrand Series 15 Model 90 Inline Pump
Since I presented my John Deere 400 garden tractor project, many subscribers have sent me emails and commented on my most recent videos for advice and shared video suggestions. I will try to cover most requests throughout my videos and I will always try to respond to comments as soon as possible. The Hydraulic Motor was a video request and I decided to create a disassembly video and a rebuild video. In this video, every angle has been covered and every part has been removed from the hydraulic motor. I created a timelapse video since the disassembly is easier than the rebuild.
Once I clean up all the parts and understand what needs to be replaced, I will get this Sundstrand Series 15 Model 90 Inline motor/pump back together with new parts. I will replace all o-rings and seals since the rubber is over 40 years old! They need to be replaced.
This Sundstrand pump is specifically for a John Deere 400 and various other pieces of equipment out there, use the exact same pump! The Bolens HT20 which I have has The same setup, but the output
gear is larger and it has more teeth. Another option the Bolens has is a relief valve directly in the "Mid-Block" of the Hydraulic Motor. Left & Right are two check valves that tend to go bad over time! I will share a different video on these features once the JD400 hydraulic Motor is rebuilt.
If this video was helpful, please give it a "thumbs up", comment if you have any questions, and consider subscribing.
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Introduction
01:08 John Deere 400 Hydraulic Motor Removal
03:47 Info Before The Disassembly
04:47 Tools For Todays Teardown
05:43 Sundstrand Series 15 Model 90 Disassembly Timelapse
11:05 Teardown Complete
11:42 Hydraulic Motor Parts Overview
17:42 Stay Tuned For The Rebuild Video
18:34 Outro
Видео John Deere 400 Hydraulic Motor Disassembly | Sundstrand Series 15 Model 90 Inline Pump канала Workshop Rebuild
Once I clean up all the parts and understand what needs to be replaced, I will get this Sundstrand Series 15 Model 90 Inline motor/pump back together with new parts. I will replace all o-rings and seals since the rubber is over 40 years old! They need to be replaced.
This Sundstrand pump is specifically for a John Deere 400 and various other pieces of equipment out there, use the exact same pump! The Bolens HT20 which I have has The same setup, but the output
gear is larger and it has more teeth. Another option the Bolens has is a relief valve directly in the "Mid-Block" of the Hydraulic Motor. Left & Right are two check valves that tend to go bad over time! I will share a different video on these features once the JD400 hydraulic Motor is rebuilt.
If this video was helpful, please give it a "thumbs up", comment if you have any questions, and consider subscribing.
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Introduction
01:08 John Deere 400 Hydraulic Motor Removal
03:47 Info Before The Disassembly
04:47 Tools For Todays Teardown
05:43 Sundstrand Series 15 Model 90 Disassembly Timelapse
11:05 Teardown Complete
11:42 Hydraulic Motor Parts Overview
17:42 Stay Tuned For The Rebuild Video
18:34 Outro
Видео John Deere 400 Hydraulic Motor Disassembly | Sundstrand Series 15 Model 90 Inline Pump канала Workshop Rebuild
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![1975 Bolens HT20 Rear End Issues (Hydraulic Motor & Differential)](https://i.ytimg.com/vi/5UHGgFyRZOk/default.jpg)
![Motorcycle Jack For Restoration #shorts](https://i.ytimg.com/vi/Xn5mDD5BHbY/default.jpg)
![Building a simple & sturdy Workshop Bench from Lumber](https://i.ytimg.com/vi/pQ3BTHGRNyE/default.jpg)
![Time for some paint - John Deere 68 & R70 Rebuild](https://i.ytimg.com/vi/6zjV4vqX6jA/default.jpg)
![This is how you paint a motorcycle frame #shorts #motorcycle #paintjob](https://i.ytimg.com/vi/B7Cg8xTnUM0/default.jpg)
![3D Printing Parts for the Thomas Skidsteer Part 3](https://i.ytimg.com/vi/TWYSdY0UqUU/default.jpg)
![John Deere 400 First Start after Engine Rebuild](https://i.ytimg.com/vi/pybKrqUotw8/default.jpg)
![JOHN DEERE 317 MOWING TALL GRASS](https://i.ytimg.com/vi/E_jfNxULsN0/default.jpg)
![REMOVING STUBBORN BEARING RACES WITH A WELDER](https://i.ytimg.com/vi/169qaSIryXY/default.jpg)
![John Deere 400 Paintjob](https://i.ytimg.com/vi/UyMjwT9lwAQ/default.jpg)
![Workshop Rebuild Talkshow - John Deere 68 & R70 Rebuild](https://i.ytimg.com/vi/FIEuSkSySJg/default.jpg)
![Top End Assembly BMW Airhead Engine Rebuild - Part 5](https://i.ytimg.com/vi/Uy3vUfJfj1M/default.jpg)
![New Project: Allis Chalmers B/C](https://i.ytimg.com/vi/AnjhWKUkFw4/default.jpg)
![BMW Airhead Main Bearing Install (R60/5)](https://i.ytimg.com/vi/qoN5LG1IeEA/default.jpg)
![John Deere 35A Tiller & PTO Conversion Kit Teardown](https://i.ytimg.com/vi/vwPblI1z_oI/default.jpg)
![Timing Chain Install BMW Airhead Rebuild - Part 2](https://i.ytimg.com/vi/8HoU4yfDCFQ/default.jpg)
![Just a couple more parts and I'm done! Bolens HT20 Part 14](https://i.ytimg.com/vi/mM2mq6yiv90/default.jpg)
![John Deere 317 Frame Prep and Paint](https://i.ytimg.com/vi/5rDNYXQalCg/default.jpg)
![Renault R5 Classic Car Barnfind!](https://i.ytimg.com/vi/64LR7BtdUoc/default.jpg)
![CLEAN A KOHLER ENGINE BLOCK](https://i.ytimg.com/vi/Q9R9R3A7xkg/default.jpg)
![Painting the Panels, Rims and Wheel Weights: Bolens HT20 Part 7](https://i.ytimg.com/vi/BJCLgLOmS40/default.jpg)