John Deere 400 Paintjob
🔽Check out my Merch Store🔽
https://workshop-rebuild.creator-spring.com/
This has been a really busy week for me behind the scenes, as I was working heavily on the John Deere 400 parts & panels. The panels for this John Deere 400 were actually in VERY good condition to start with. There were only two minor spots that I had to tap out and fill with a little bit of body filler. The hood on the other hand had various scratches and multiple dings...I spent many hours just getting the hood sanded down and filling in all the imperfections!
Once I was done with the bodywork,I got a temporary spray booth set up on the far side of the shop, so I could get all these parts painted. Usually, I paint outside because I like to keep this shop somewhat clean.
Even after the paint job, I noticed some areas of green paint outside of the booth! It's never good enough to just close everything off with tarps. The paint always tries to escape!!
Nevertheless, I was able to give all the panels a coat of primer and three coats of paint inside & out! I haven't painted much in the past, but I'm really satisfied with the outcome of these panels.
Let me know what you think down below!
There are still a couple parts I need, as the seat, decals and taillights, but I will sort that out in the upcoming days for sure.
If this video was helpful, please give it a "thumbs up", comment if you have any questions and consider subscribing.
________________________________________________________________________
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Intro
00:51 Parts & Products
05:44 John Deere 400 Rear Fender Install
07:59 John Deere 400 Side Panel Install
08:36 John Deere 400 Hood Install
09:38 John Deere 400 Steering Wheel Install
10:47 Extra Parts
11:58 What's Next/ Outro
Видео John Deere 400 Paintjob канала Workshop Rebuild
https://workshop-rebuild.creator-spring.com/
This has been a really busy week for me behind the scenes, as I was working heavily on the John Deere 400 parts & panels. The panels for this John Deere 400 were actually in VERY good condition to start with. There were only two minor spots that I had to tap out and fill with a little bit of body filler. The hood on the other hand had various scratches and multiple dings...I spent many hours just getting the hood sanded down and filling in all the imperfections!
Once I was done with the bodywork,I got a temporary spray booth set up on the far side of the shop, so I could get all these parts painted. Usually, I paint outside because I like to keep this shop somewhat clean.
Even after the paint job, I noticed some areas of green paint outside of the booth! It's never good enough to just close everything off with tarps. The paint always tries to escape!!
Nevertheless, I was able to give all the panels a coat of primer and three coats of paint inside & out! I haven't painted much in the past, but I'm really satisfied with the outcome of these panels.
Let me know what you think down below!
There are still a couple parts I need, as the seat, decals and taillights, but I will sort that out in the upcoming days for sure.
If this video was helpful, please give it a "thumbs up", comment if you have any questions and consider subscribing.
________________________________________________________________________
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Intro
00:51 Parts & Products
05:44 John Deere 400 Rear Fender Install
07:59 John Deere 400 Side Panel Install
08:36 John Deere 400 Hood Install
09:38 John Deere 400 Steering Wheel Install
10:47 Extra Parts
11:58 What's Next/ Outro
Видео John Deere 400 Paintjob канала Workshop Rebuild
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1975 Bolens HT20 Rear End Issues (Hydraulic Motor & Differential)Motorcycle Jack For Restoration #shortsBuilding a simple & sturdy Workshop Bench from Lumber3D Printing Parts for the Thomas Skidsteer Part 3John Deere 400 First Start after Engine RebuildJOHN DEERE 317 MOWING TALL GRASSREMOVING STUBBORN BEARING RACES WITH A WELDERWorkshop Rebuild Talkshow - John Deere 68 & R70 RebuildTop End Assembly BMW Airhead Engine Rebuild - Part 5BMW Airhead Main Bearing Install (R60/5)John Deere 35A Tiller & PTO Conversion Kit TeardownTiming Chain Install BMW Airhead Rebuild - Part 2Just a couple more parts and I'm done! Bolens HT20 Part 14John Deere 317 Frame Prep and PaintRenault R5 Classic Car Barnfind!CLEAN A KOHLER ENGINE BLOCKPainting the Panels, Rims and Wheel Weights: Bolens HT20 Part 7John Deere 400 Hydraulic Motor Disassembly | Sundstrand Series 15 Model 90 Inline PumpJohn Deere 317 Primer and PaintJohn Deere 317 First Startup After Engine Rebuild