1975 Bolens HT20 Rear End Issues (Hydraulic Motor & Differential)
🔽Check out my Merch Store🔽
https://workshop-rebuild.creator-spring.com/
I've used the Bolens HT20 for some VERY light yard use so far and it has been good to me...until I started to notice that the forward and reserve was acting up!
The Bolens is pretty bulletproof when it comes to the drivetrain, but I know something isn't right. Once the engine is running at mid-full throttle, I activate the foot pedal and it moves the tractor about 1 meter and then the rear end powers the wheels inconsistently. I've gone through the check valves as well as the pressure relief valves and everything seems to be in place and like new!
In this video I decided to tear into the rear end, as I'd like to have a proper running & working tractor. Watch me remove the rear differential with the hydraulic inline motor: Sundstrand Danfoss Series 15 Model 90-1153.
I share a bunch of information on the rear end and how to get to the bolts. If you're having the same issues, I'll do my best to solve this problem in Part 2 of this video. I will disassemble the hydraulic motor/pump and eventually the differential, as I've found many chips (metal debris)
on the drain plug magnet. Let's hope it's nothing too serious!!
If this video was helpful, please give it a "thumbs up", comment if you have any questions and consider subscribing.
𝗟𝗶𝗻𝗸 𝘁𝗼 𝗦𝘂𝗻𝗱𝘀𝘁𝗿𝗮𝗻𝗱 𝗦𝗲𝗿𝗶𝗲𝘀 𝟭𝟱 𝗠𝗼𝗱𝗲𝗹 𝟵𝟬 𝗗𝗿𝗮𝘄𝗶𝗻𝗴𝘀: https://assets.danfoss.com/documents/50377/AX152886482997en-000101.pdf
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟒𝟎𝟎:https://bit.ly/3A3IjFM
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Issue Introduction
02:38 Drivetrain & Free-Wheel Valve
04:18 Removing The Fender
05:11 What Bolts To Remove
07:00 Lets Do This!
08:34 The Aftermath
10:13 Differential Visual Inspection
12:33 Hydraulic Motor Plan
Видео 1975 Bolens HT20 Rear End Issues (Hydraulic Motor & Differential) канала Workshop Rebuild
https://workshop-rebuild.creator-spring.com/
I've used the Bolens HT20 for some VERY light yard use so far and it has been good to me...until I started to notice that the forward and reserve was acting up!
The Bolens is pretty bulletproof when it comes to the drivetrain, but I know something isn't right. Once the engine is running at mid-full throttle, I activate the foot pedal and it moves the tractor about 1 meter and then the rear end powers the wheels inconsistently. I've gone through the check valves as well as the pressure relief valves and everything seems to be in place and like new!
In this video I decided to tear into the rear end, as I'd like to have a proper running & working tractor. Watch me remove the rear differential with the hydraulic inline motor: Sundstrand Danfoss Series 15 Model 90-1153.
I share a bunch of information on the rear end and how to get to the bolts. If you're having the same issues, I'll do my best to solve this problem in Part 2 of this video. I will disassemble the hydraulic motor/pump and eventually the differential, as I've found many chips (metal debris)
on the drain plug magnet. Let's hope it's nothing too serious!!
If this video was helpful, please give it a "thumbs up", comment if you have any questions and consider subscribing.
𝗟𝗶𝗻𝗸 𝘁𝗼 𝗦𝘂𝗻𝗱𝘀𝘁𝗿𝗮𝗻𝗱 𝗦𝗲𝗿𝗶𝗲𝘀 𝟭𝟱 𝗠𝗼𝗱𝗲𝗹 𝟵𝟬 𝗗𝗿𝗮𝘄𝗶𝗻𝗴𝘀: https://assets.danfoss.com/documents/50377/AX152886482997en-000101.pdf
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟒𝟎𝟎:https://bit.ly/3A3IjFM
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
Instagram: https://www.instagram.com/workshoprebuild/
Tiktok: https://www.tiktok.com/@workshoprebuild?lang=en
E-Mail: Workshoprebuild@gmail.com
🎵: https://soundcloud.com/workshop-rebuild/sets/music-for-the-youtube-channel
Timestamps:
00:00 Issue Introduction
02:38 Drivetrain & Free-Wheel Valve
04:18 Removing The Fender
05:11 What Bolts To Remove
07:00 Lets Do This!
08:34 The Aftermath
10:13 Differential Visual Inspection
12:33 Hydraulic Motor Plan
Видео 1975 Bolens HT20 Rear End Issues (Hydraulic Motor & Differential) канала Workshop Rebuild
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Motorcycle Jack For Restoration #shortsBuilding a simple & sturdy Workshop Bench from Lumber3D Printing Parts for the Thomas Skidsteer Part 3John Deere 400 First Start after Engine RebuildJOHN DEERE 317 MOWING TALL GRASSBMW R60/5 Drive Dog Removal and Install - Rear Drive MechanismREMOVING STUBBORN BEARING RACES WITH A WELDERJohn Deere 400 PaintjobWorkshop Rebuild Talkshow - John Deere 68 & R70 RebuildTop End Assembly BMW Airhead Engine Rebuild - Part 5New Project: Allis Chalmers B/CBMW Airhead Main Bearing Install (R60/5)Disassembly of the Dash Panel: Bolens HT20 Part 6John Deere 35A Tiller & PTO Conversion Kit TeardownTiming Chain Install BMW Airhead Rebuild - Part 2Just a couple more parts and I'm done! Bolens HT20 Part 14John Deere 317 Frame Prep and PaintRenault R5 Classic Car Barnfind!CLEAN A KOHLER ENGINE BLOCKPainting the Panels, Rims and Wheel Weights: Bolens HT20 Part 7