How to measure roller blinds

How to measure Roller blinds blinds http://eblindsaustralia.com.au/ 1800 325 463

You will need: Tape measure, step ladder, Pencil
Measuring your new roller blinds couldn’t be easier, simply follow the steps in this video
Be sure to use a steel tape measure to record your measurements as cloth tapes can sag giving a false reading, and don’t be afraid to measure twice
Where possible have someone hold the other end of the tape and get them to double check your measurements
Always look for obstructions such as door handles, window winders etc when measuring.

OUTSIDE MOUNT
Things to know: With a face fit Roller blind, The brackets are fitted to the extreme outer edges of the architrave. This means the fabric will be approximately 15mm narrower from both edges to allow for lifting mechanism
Width - Measure from the outer edge of architrave Point A to outer edge of architrave
Height - Measure from the top of the architrave Point B to the base of the window frame
Hint: If possible measure the roller blind to go below the base of the window by approximately 50mm to reduce light bleed from the bottom

INSIDE MOUNT
Things to know: With a recess fit roller blind, the brackets are fitted to the extreme inside edges of the frame. This means the fabric will be approximately 15mm narrower from both edges to allow for the lifting mechanism
Width- measure from the inside edge of the window frame Point A to inside edge of the window frame, be sure to take 3 measurements – Top / Middle and Bottom. The narrowest width will be your measurement
Height- Measure from the inside top of the window frame Point B to the inside base of the window frame, be sure to take 3 measurements – Left / Middle and Right. The Shortest length will be your measurement.
Do not make any further deductions from your measurements; these will be done automatically by the factory
eBlinds Australia, You measure, You install, You save, You beauty

Видео How to measure roller blinds канала eBlinds Australia