LASER REVIEW - Future Upgrades & Mods of Chinese Red & Black CNC Co2 Laser Machine off eBay - 80W
80W Chinese Co2 Laser Review - eBay Purchased Co2 Laser Engraving & Cutting Machine. With Info on Some Future Improvements. I’ve had this laser machine for a few months now and have already made a few upgrades as you may have seen in my previous videos.
Co2 Laser Machine Online @ Amazon https://amzn.to/2J8nwYe
Note: My Website is Now https://www.mwlaser.com.au/
A LIST OF UPGRADE PARTS I USED CAN BE FOUND HERE: https://mwlaser.com.au/upgrades-for-red-black-chinese-laser/
To reduce the noise in my workshop I have recently replaced the extraction fan unit for my Co2 Laser, which was very noisy with a 6" inline fan, it is half as quiet as before, with minimal reduction to extraction capabilities. Defiantly worth the Upgrade. Highly recommended.
US - https://amzn.to/2NncQdx AU - https://amzn.to/2RJp3HZ
https://mwlaser.com.au/product-category/laser-plans-guides/
So I want to review how I find the machine performs but mainly discuss, and things I believe need improvement and would like to change.
I’ll start by saying that for the price of this machine approx AUD $3300 it performs well right out of the box with all the budget accessories that it came with. If you have seen the un-boxing video I made when the machine arrived you will see it came with an aquarium pump, exhaust blower and hoses, and a small air pump.
After using this machine for a few months now, I will say that I have not had any issues with any of the accessory pumps and fans. They do what they were designed to do and would be ok to remain if I only used the machine a few hours a week.
After a lot of testing with cut settings, power speed, and air; I have the machine performing quite well. It has handled any task I have given it so far. I have been cutting and engraving with success with Plyboard, MDF, Acrylic, Laserable plastics, Foils, timber and engraving Aluminium.
(1:20) This machine has a lot to offer but there are also things that need improving.
Here are ten things I don’t like on this machine and will update and improve.
(1:51) 1 - Laser Controller
(2:22) 2 - The machine came without any gauges - https://amzn.to/2RLdh00
(3:48) 3 - The water cooling - https://amzn.to/2Lo1jrP
(5:30) 4 - The internal lighting in the machine
(6:40) 5 - The LED Red Dot - https://amzn.to/2Njq5Mz
(8:35) 6 - Air supply
(9:30) 7 - Air assist
(12.01) 8 - Exhaust Air Flow - https://amzn.to/2Nfw5pt
(12:58) 9 - Z-Axis lift table
(16:03) 10 - The Honeycomb bed
(18:43) I would like to add that although I use and recommend Cloudray Laser for my laser components, this video does not include paid sponsorship by Cloudray laser. I have found their products, service and support to be exceptional.
For open and full disclosure future videos may include components from Cloudray Laser for me to test and review, the opinions of the products and their performance will be my own.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at http://www.mwlaser.com.au/
Instagram https://www.instagram.com/mattsworkshop/
Facebook https://www.facebook.com/mattsworkshopau
Cloudray laser’s website http://www.cloudraylaser.com
== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====
Any questions please feel free to email me matt@mwlaser.com.au or leave a comment below.
NOTE: This is not a paid production or advertisement.
Recorded with a Logitech C922 - https://amzn.to/2NcR5Nw
Видео LASER REVIEW - Future Upgrades & Mods of Chinese Red & Black CNC Co2 Laser Machine off eBay - 80W канала MW Laser
Co2 Laser Machine Online @ Amazon https://amzn.to/2J8nwYe
Note: My Website is Now https://www.mwlaser.com.au/
A LIST OF UPGRADE PARTS I USED CAN BE FOUND HERE: https://mwlaser.com.au/upgrades-for-red-black-chinese-laser/
To reduce the noise in my workshop I have recently replaced the extraction fan unit for my Co2 Laser, which was very noisy with a 6" inline fan, it is half as quiet as before, with minimal reduction to extraction capabilities. Defiantly worth the Upgrade. Highly recommended.
US - https://amzn.to/2NncQdx AU - https://amzn.to/2RJp3HZ
https://mwlaser.com.au/product-category/laser-plans-guides/
So I want to review how I find the machine performs but mainly discuss, and things I believe need improvement and would like to change.
I’ll start by saying that for the price of this machine approx AUD $3300 it performs well right out of the box with all the budget accessories that it came with. If you have seen the un-boxing video I made when the machine arrived you will see it came with an aquarium pump, exhaust blower and hoses, and a small air pump.
After using this machine for a few months now, I will say that I have not had any issues with any of the accessory pumps and fans. They do what they were designed to do and would be ok to remain if I only used the machine a few hours a week.
After a lot of testing with cut settings, power speed, and air; I have the machine performing quite well. It has handled any task I have given it so far. I have been cutting and engraving with success with Plyboard, MDF, Acrylic, Laserable plastics, Foils, timber and engraving Aluminium.
(1:20) This machine has a lot to offer but there are also things that need improving.
Here are ten things I don’t like on this machine and will update and improve.
(1:51) 1 - Laser Controller
(2:22) 2 - The machine came without any gauges - https://amzn.to/2RLdh00
(3:48) 3 - The water cooling - https://amzn.to/2Lo1jrP
(5:30) 4 - The internal lighting in the machine
(6:40) 5 - The LED Red Dot - https://amzn.to/2Njq5Mz
(8:35) 6 - Air supply
(9:30) 7 - Air assist
(12.01) 8 - Exhaust Air Flow - https://amzn.to/2Nfw5pt
(12:58) 9 - Z-Axis lift table
(16:03) 10 - The Honeycomb bed
(18:43) I would like to add that although I use and recommend Cloudray Laser for my laser components, this video does not include paid sponsorship by Cloudray laser. I have found their products, service and support to be exceptional.
For open and full disclosure future videos may include components from Cloudray Laser for me to test and review, the opinions of the products and their performance will be my own.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at http://www.mwlaser.com.au/
Instagram https://www.instagram.com/mattsworkshop/
Facebook https://www.facebook.com/mattsworkshopau
Cloudray laser’s website http://www.cloudraylaser.com
== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====
Any questions please feel free to email me matt@mwlaser.com.au or leave a comment below.
NOTE: This is not a paid production or advertisement.
Recorded with a Logitech C922 - https://amzn.to/2NcR5Nw
Видео LASER REVIEW - Future Upgrades & Mods of Chinese Red & Black CNC Co2 Laser Machine off eBay - 80W канала MW Laser
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![I Buy a $2,000 Chinese Co2 Laser, What You Need to Get Started](https://i.ytimg.com/vi/bhXVJAIf8Aw/default.jpg)
![CHINESE RED/BLACK LASER CUTTER REVIEW 2019 HD](https://i.ytimg.com/vi/Uck5EkeJ_2M/default.jpg)
![Chinese eBay laser how good are they, and operating them](https://i.ytimg.com/vi/tGzj4OMwJIw/default.jpg)
![Co2 Laser, AIR COMPRESSOR Upgrade, Setup & Testing, With Ultimate Air Assist](https://i.ytimg.com/vi/4P-5nIckybM/default.jpg)
![Co2 Laser Project - Coasters Using LightBurn Circular Array Tool](https://i.ytimg.com/vi/7P-DDGpkRY4/default.jpg)
![60 Watt CO2 Laser Unboxing and Initial Setup](https://i.ytimg.com/vi/zJgwu4uXXQ0/default.jpg)
![Co2 Laser Upgrade - Laser & Red Dot Beam Combiner for CNC Co2 Laser Machine](https://i.ytimg.com/vi/Eh1ZSW4hMSs/default.jpg)
![mA - MILLIAMP METER INSTALL - CNC Co2 Laser Engraving / Cutting Machine - How to install ammeter](https://i.ytimg.com/vi/8eRCjkh9tZA/default.jpg)
![](https://i.ytimg.com/vi/ogDrkeeTJgk/default.jpg)
![How to align your mirrors on your Chinese / OMTech CO2 laser](https://i.ytimg.com/vi/G-HhArItCqQ/default.jpg)
![How to Separate The Laser Cabinet From The Wheelbase - Red & Black Co2 Laser Machine - 60/80W Models](https://i.ytimg.com/vi/UP-4USQs1Bg/default.jpg)
![2020 World's most powerful CW handheld laser](https://i.ytimg.com/vi/W6FbUiiwutQ/default.jpg)
![80W Chinese Laser Cutter: Review, Setup, Use](https://i.ytimg.com/vi/-5-EPC-gnzA/default.jpg)
![Closer Look at Boss Laser (10 month update)](https://i.ytimg.com/vi/quNjGPrewzA/default.jpg)
![Best Chinese Co2 Laser Cutter Engraver in 2022 Red VS Blue](https://i.ytimg.com/vi/SZz7Br_-Mwg/default.jpg)
![[10] RuiDa Controller - Multi Origin Function](https://i.ytimg.com/vi/Datnyelo1Rg/default.jpg)
![Cutting 10mm plywood with low budget Laser cutter](https://i.ytimg.com/vi/xb0Th7FBwNw/default.jpg)
![เครื่องแกะสลักเลเซอร์ 80W 6090 CO2 Laser Engraving Machine](https://i.ytimg.com/vi/ebfOO5nvR3I/default.jpg)
![Laser Cutting Baltic Birch Plywood (eBay Laser)](https://i.ytimg.com/vi/kXGD2FVS7uI/default.jpg)
![Iron on Transfer Using Trotec LaserFlex For Use on CNC Co2 Laser Machines](https://i.ytimg.com/vi/NzVtJC5qmGw/default.jpg)