Cutting 10mm plywood with low budget Laser cutter

Self made Laser cutter with most powerful NUBM44 445nm Laser Diode, 5A PWM Driver,
woodpecker V3.4 controll board and air assist.

Now i cut paper, leather, wood and plywood up to 10mm.

All tests in original speed !

AirAssit DIY Compressor - https://youtu.be/iASeyv3eqv8

ebay:
NUBM44 Laser Diode - https://ebay.to/3nd3m2l
5A constant current driver - https://ebay.to/34gnckK
Collimating Lens - https://ebay.to/36vfWEu
Control Board - https://ebay.to/3jmLTlQ
DIY Laser engraver - https://ebay.to/3l7ySx0

Aliexpress:
NUBM44 Laser Diode - http://s.click.aliexpress.com/e/_dZqe6Wq
5A constant current driver - http://s.click.aliexpress.com/e/_dZ0tfto
Collimating Lens - http://s.click.aliexpress.com/e/_dTxfgeI
Control Board - http://s.click.aliexpress.com/e/_dWo68qO
DIY Laser engraver - http://s.click.aliexpress.com/e/_dUEWmxg
Air assist nozzle - https://s.click.aliexpress.com/e/_9vLSJH
30x30 DualBallFan - https://s.click.aliexpress.com/e/_AUDNFZ
40x40 ServerFan -https://s.click.aliexpress.com/e/_A6UaKL

Видео Cutting 10mm plywood with low budget Laser cutter канала Modellbau Kalender