Eclipson E VTOL QuickTune lua script
Run VTOL QuickTune lua script. It finished tuning in less than 2 minutes!
This is config #3, Matek H743 Wing FC, fast KST DS215MG V3.0 servo. Took so long time to tune this. Saves 10s of tuning flights, so happy. Mapped log messages to see the progress. Tuning progress message with parameter value, slew rate is displayed
Result was
Q_A_RAT_RLL_D 0.004300 to 0.007607
Q_A_RAT_PIT_P 0.150000 to 0.110231
Q_A_RAT_PIT_D 0.000500 to 0.000814
Q_A_RAT_YAW_P 0.450000 to 0.500000
Q_A_RAT_YAW_D 0.003000 to 0.010000
Q_A_RAT_YAW_FLTE 10.000000 to 2.000000
Q_A_RAT_RLL_P 0.200000 to 0.254573
For detail, refer to updated Tailsitter VTOL Tuning wiki
https://ardupilot.org/plane/docs/tailsitter-tuning-guide.html
VTOL QuickTune lua
https://github.com/ArduPilot/ardupilot/blob/master/libraries/AP_Scripting/applets/VTOL-quicktune.md
Log of this flight will be posted on discuss E VTOL thread
https://discuss.ardupilot.org/t/eclipson-e-vtol-3d-printable-dual-motor-tailsitter/80324/101
GH010198 #3 VTOL quick tune
Видео Eclipson E VTOL QuickTune lua script канала ssatorugm
This is config #3, Matek H743 Wing FC, fast KST DS215MG V3.0 servo. Took so long time to tune this. Saves 10s of tuning flights, so happy. Mapped log messages to see the progress. Tuning progress message with parameter value, slew rate is displayed
Result was
Q_A_RAT_RLL_D 0.004300 to 0.007607
Q_A_RAT_PIT_P 0.150000 to 0.110231
Q_A_RAT_PIT_D 0.000500 to 0.000814
Q_A_RAT_YAW_P 0.450000 to 0.500000
Q_A_RAT_YAW_D 0.003000 to 0.010000
Q_A_RAT_YAW_FLTE 10.000000 to 2.000000
Q_A_RAT_RLL_P 0.200000 to 0.254573
For detail, refer to updated Tailsitter VTOL Tuning wiki
https://ardupilot.org/plane/docs/tailsitter-tuning-guide.html
VTOL QuickTune lua
https://github.com/ArduPilot/ardupilot/blob/master/libraries/AP_Scripting/applets/VTOL-quicktune.md
Log of this flight will be posted on discuss E VTOL thread
https://discuss.ardupilot.org/t/eclipson-e-vtol-3d-printable-dual-motor-tailsitter/80324/101
GH010198 #3 VTOL quick tune
Видео Eclipson E VTOL QuickTune lua script канала ssatorugm
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Light MH61 wingEclipson E VTOL #3 additional tuning.Eclispon E VTOL #4 fun flying in calm conditionEclipson E VTOL #13 familiarization flightEclipson 3D high alpha practice continues..3DLabPrint Cub on float maidenEclipson E VTOL high lean pitch improvement, crashEclispon E VTOL test 2022 01 23 13 53 19Eclispon E VTOL #4 in windy conditionEclipson E VTOL #3 config tuningEclipson E VTOL#1 flight'Speedo' like 1200mm glider 3D printedMita 3 kai 1 flight480mm wing ride and log overlayLW PLA printed EWW ok flight #2Eclipson FPV 2m glider betaPeter Besenyei in MotegiArduplane scripted aerobatics Sportsman sequenceEclipson 3D aerobatics planeEclipson Cobra 50mm EDF jet demo