3DLabPrint Cub on float maiden

3DLabPrint has released J-3 Cub with float 'for free!' last weekend.
I had a chance to float flying today, so printed quick and flew today.
As you see this float is ok for take off and land. Plane is nose heavy and not well trimmed, wing was gusting coming from behind the bank.
Total weight is 504.5g without battery, with 73.5g 850mAh 3s battery, flying weight is 578g.
Used 2212 1000kv motor, GWS 8040E. Wing is covered with Japan paper and WBPU (similar to micro glass, my print with ColorFabb LW PLA was too thin.) Fuse/tail is 3DLabPrint gray LW PLA. Float leg is NGEN.
RCGroups thread
https://www.rcgroups.com/forums/showthread.php?4135391-3D-LabPrint-Piper-Cub
GH010189 Cub maiden short

Видео 3DLabPrint Cub on float maiden канала ssatorugm