Eclipson 3D aerobatics plane
I had a chance to build the upcoming Eclipson 3D aerobatic plane. span 1.1m, ~1.2kg. This has tuned airfoil suited for stable 3D flying. Fun plane to fly!
== This is released! https://www.eclipson-airplanes.com/eclipson3d ==
Sorry for poor video quality. I needed to zoom GoPro video a lot.
Nose is PLA+, wing and tail are LW PLA (natural ColorFabb and gray 3DLabPrint).
SunnySky X2814 1250kv, APC 11x5.5e, 40A ESC, 2200 - 2600mAh 3s batt.
GH010223 Edit
Видео Eclipson 3D aerobatics plane канала ssatorugm
== This is released! https://www.eclipson-airplanes.com/eclipson3d ==
Sorry for poor video quality. I needed to zoom GoPro video a lot.
Nose is PLA+, wing and tail are LW PLA (natural ColorFabb and gray 3DLabPrint).
SunnySky X2814 1250kv, APC 11x5.5e, 40A ESC, 2200 - 2600mAh 3s batt.
GH010223 Edit
Видео Eclipson 3D aerobatics plane канала ssatorugm
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Light MH61 wingEclipson E VTOL #3 additional tuning.Eclispon E VTOL #4 fun flying in calm conditionEclipson E VTOL #13 familiarization flightEclipson 3D high alpha practice continues..3DLabPrint Cub on float maidenSLT VTOL Quad plane 20160522Eclipson E VTOL high lean pitch improvement, crashEclispon E VTOL test 2022 01 23 13 53 19Eclispon E VTOL #4 in windy conditionEclipson E VTOL #3 config tuningEclipson Model B V2 STOL with flapEclipson E VTOL#1 flight'Speedo' like 1200mm glider 3D printedSlope soaring 808 #16Mita 3 kai 1 flightEclipson E VTOL QuickTune lua scriptANA flight NH30 ITM to HND480mm wing ride and log overlayLW PLA printed EWW ok flight #2Eclipson Model B V2 touch and go