Tello Video Stream with Less Than 100 Lines of Code - Node JS and FFmpeg
Here is the source code from the video:
https://github.com/dbaldwin/tello-video-nodejs-websockets
and the JSmpeg project that was instrumental in helping me pull this off:
https://github.com/phoboslab/jsmpeg
and finally, here is the Node-RED flow:
https://github.com/dbaldwin/DroneBlocks-Tello-EDU-Node-RED/blob/master/15_node_red_tello_video.json
Good luck and I hope you're able to stream video with Tello and Tello EDU!
Видео Tello Video Stream with Less Than 100 Lines of Code - Node JS and FFmpeg канала Dennis Baldwin
https://github.com/dbaldwin/tello-video-nodejs-websockets
and the JSmpeg project that was instrumental in helping me pull this off:
https://github.com/phoboslab/jsmpeg
and finally, here is the Node-RED flow:
https://github.com/dbaldwin/DroneBlocks-Tello-EDU-Node-RED/blob/master/15_node_red_tello_video.json
Good luck and I hope you're able to stream video with Tello and Tello EDU!
Видео Tello Video Stream with Less Than 100 Lines of Code - Node JS and FFmpeg канала Dennis Baldwin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Phantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party Apps](https://i.ytimg.com/vi/hoW2jbFpBEs/default.jpg)
![Reversing Motor Rotation with Castle Creations Multirotor ESCs and Castle Link](https://i.ytimg.com/vi/HQRBoZIh7-Y/default.jpg)
![DEXI Drone ARK Flow and IR Break Beam Bench/Flight Test](https://i.ytimg.com/vi/mxwg7Ip3ULI/default.jpg)
![Yes My YouTube Account was Hijacked Today and My Sincere Apology](https://i.ytimg.com/vi/BdvbKKXnHHQ/default.jpg)
![FireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2](https://i.ytimg.com/vi/6ANlAHPle5w/default.jpg)
![MWC Flip 1.5 RTF and Updated Top Case Design](https://i.ytimg.com/vi/bTjyb8GL45w/default.jpg)
![3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler Plane](https://i.ytimg.com/vi/dIg6f51QMy4/default.jpg)
![DroneBlocks with AirSim for Panorama Simulation](https://i.ytimg.com/vi/mR-CgeX0Zqg/default.jpg)
![APM MinimOSD 3D Printed Case Available for Download on Thingiverse](https://i.ytimg.com/vi/iZB3TCdfxJQ/default.jpg)
![QAV400 / QAV500 3D Printed Landing Gear Revisited](https://i.ytimg.com/vi/RBUr15La5cE/default.jpg)
![APM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-Plane](https://i.ytimg.com/vi/KJ-hkQPmsX0/default.jpg)
![iPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration Reduction](https://i.ytimg.com/vi/ezdgAzFAoYA/default.jpg)
![3D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 2](https://i.ytimg.com/vi/FuGjRsvrrVs/default.jpg)
![Recruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT Network](https://i.ytimg.com/vi/rg3p1PW54cs/default.jpg)
![NAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & Failsafe](https://i.ytimg.com/vi/V03FSY4tyig/default.jpg)
![QAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight Modes](https://i.ytimg.com/vi/hKkmxpuFGvQ/default.jpg)
![3D Printed GPS/Compass Stand for APM and Pixhawk Multirotors](https://i.ytimg.com/vi/Ubp0vpPWjJM/default.jpg)
![HoverGames Drone Vibration Analysis w/ PX4 Flight Review - Don't Let Vibrations Kill Your MultiRotor](https://i.ytimg.com/vi/RGaxJYsERkw/default.jpg)
![DroneMaps FAA Sectional Charts and UAS Facility Maps for Android and iOS Coming Soon](https://i.ytimg.com/vi/XpLP9JpYtKc/default.jpg)
![How I Design and 3D Print Parts with Rhino 3D and MakerBot Replicator 2 - The Magic Coin Paddle](https://i.ytimg.com/vi/GaO9g0v_QYI/default.jpg)
![Autonomous Aerial Video of Onion Creek using Pixhawk and ArduCopter 3.2](https://i.ytimg.com/vi/1Bpsn_sVU8k/default.jpg)