Загрузка страницы
Все видеоНовые видеоПопулярные видеоКатегории видео

FireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2

I finally got the BirdsEyeView FireFLY6 to a point where I can hover it. This video shows the initial hover in the garage, which was a success. I'm looking forward to getting this into forward flight next week. I'll be sure to share my experience. More info on this platform can be found here:

http://bit.ly/1Cpm6Qm

Видео FireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2 канала Dennis Baldwin
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
23 января 2015 г. 9:07:17
00:03:23
Dennis Baldwin
Теги
Правообладателям
Жалоба
Комментарии
Другие видео канала
Phantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party AppsPhantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party AppsReversing Motor Rotation with Castle Creations Multirotor ESCs and Castle LinkReversing Motor Rotation with Castle Creations Multirotor ESCs and Castle LinkOpenDroneMap Now with Support for Textured Surface ModelsOpenDroneMap Now with Support for Textured Surface ModelsYes My YouTube Account was Hijacked Today and My Sincere ApologyYes My YouTube Account was Hijacked Today and My Sincere ApologyGPS Bus Tracking with Tufts UniversityGPS Bus Tracking with Tufts UniversityMWC Flip 1.5 RTF and Updated Top Case DesignMWC Flip 1.5 RTF and Updated Top Case Design3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler Plane3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler PlaneQAV 250 with Pixfalcon Telemetry and Guided Mode Using Tower for AndroidQAV 250 with Pixfalcon Telemetry and Guided Mode Using Tower for AndroidDroneBlocks with AirSim for Panorama SimulationDroneBlocks with AirSim for Panorama SimulationAPM MinimOSD 3D Printed Case Available for Download on ThingiverseAPM MinimOSD 3D Printed Case Available for Download on ThingiverseQAV400 / QAV500 3D Printed Landing Gear RevisitedQAV400 / QAV500 3D Printed Landing Gear RevisitedDroneMaps Part 107 Class B Airspace QuestionDroneMaps Part 107 Class B Airspace QuestionAPM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-PlaneAPM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-PlaneiPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration ReductioniPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration ReductionDronePan 2.0 Beta with Support for Waypoints Using DJI SDK 4.2.2DronePan 2.0 Beta with Support for Waypoints Using DJI SDK 4.2.23D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 23D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 2Recruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT NetworkRecruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT NetworkNAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & FailsafeNAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & FailsafeQAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight ModesQAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight ModesAwesome $5 FPV Racing Simulator FPV Freerider Setup with FrSky TaranisAwesome $5 FPV Racing Simulator FPV Freerider Setup with FrSky Taranis
Статистика портала
Яндекс.Метрика
© 2008-2024 «Информационно-развлекательный портал города Верхняя Салда»
| Карта портала | Реклама | Контакты | Сообщить об ошибке | Соглашения
salda.ws salda.ws@mail.ru
Сейчас на сайте: 512 Статистика портала