Reversing Motor Rotation with Castle Creations Multirotor ESCs and Castle Link
I wanted to share a quick tip regarding reversing motor rotation with Castle multirotor ESCs. Since I've always reversed ESC rotation by desoldering and soldering two of the three leads I wanted to try Castle Link where rotation can be configured via software. It takes a little bit of setting up, but after that it's a breeze to reverse motor rotation and configure numerous ESC parameters. Here is a link to the ESCs I'm using:
http://amzn.to/1D61YEg
and here's a link to the Castle Link cable:
http://amzn.to/1zSU1ju
You can download the Castle Link software from here:
http://www.castlecreations.com/downloads.html
Видео Reversing Motor Rotation with Castle Creations Multirotor ESCs and Castle Link канала Dennis Baldwin
http://amzn.to/1D61YEg
and here's a link to the Castle Link cable:
http://amzn.to/1zSU1ju
You can download the Castle Link software from here:
http://www.castlecreations.com/downloads.html
Видео Reversing Motor Rotation with Castle Creations Multirotor ESCs and Castle Link канала Dennis Baldwin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Phantom 3 and Phantom 4 RC Flight Mode Switch Explained for 3rd Party Apps](https://i.ytimg.com/vi/hoW2jbFpBEs/default.jpg)
![Yes My YouTube Account was Hijacked Today and My Sincere Apology](https://i.ytimg.com/vi/BdvbKKXnHHQ/default.jpg)
![FireFLY6 Garage Hover Test and Y6 Propeller Configuration w/ NAZA V2](https://i.ytimg.com/vi/6ANlAHPle5w/default.jpg)
![MWC Flip 1.5 RTF and Updated Top Case Design](https://i.ytimg.com/vi/bTjyb8GL45w/default.jpg)
![3DR APM 2.6 Yaw Orientation for Autonomous Flight w/ Bixler Plane](https://i.ytimg.com/vi/dIg6f51QMy4/default.jpg)
![DroneBlocks with AirSim for Panorama Simulation](https://i.ytimg.com/vi/mR-CgeX0Zqg/default.jpg)
![APM MinimOSD 3D Printed Case Available for Download on Thingiverse](https://i.ytimg.com/vi/iZB3TCdfxJQ/default.jpg)
![QAV400 / QAV500 3D Printed Landing Gear Revisited](https://i.ytimg.com/vi/RBUr15La5cE/default.jpg)
![APM 2.5 Hardware in the Loop (HIL) Simulation Testing Stabilize and RTL Flight Modes w/ X-Plane](https://i.ytimg.com/vi/KJ-hkQPmsX0/default.jpg)
![iPower 950kV Brushless Motor Cleaning on TBS Discovery Quadcopter - Working on Vibration Reduction](https://i.ytimg.com/vi/ezdgAzFAoYA/default.jpg)
![3D Printed Arm Extensions for DJI Flamewheel Frame using Makerbot Replicator 2](https://i.ytimg.com/vi/FuGjRsvrrVs/default.jpg)
![Recruit Wing with PX4 Telemetry Using Raspberry Pi Zero, GSM Module, and Hologram IoT Network](https://i.ytimg.com/vi/rg3p1PW54cs/default.jpg)
![NAZA Lite and TBS Discovery with Turnigy 9XR 3 Flight Modes - GPS Attitude, Manual, & Failsafe](https://i.ytimg.com/vi/V03FSY4tyig/default.jpg)
![QAV400 Garage and Backyard Maiden Flight w/ NAZA and Turnigy 9X 3 Flight Modes](https://i.ytimg.com/vi/hKkmxpuFGvQ/default.jpg)
![3D Printed GPS/Compass Stand for APM and Pixhawk Multirotors](https://i.ytimg.com/vi/Ubp0vpPWjJM/default.jpg)
![HoverGames Drone Vibration Analysis w/ PX4 Flight Review - Don't Let Vibrations Kill Your MultiRotor](https://i.ytimg.com/vi/RGaxJYsERkw/default.jpg)
![DroneMaps FAA Sectional Charts and UAS Facility Maps for Android and iOS Coming Soon](https://i.ytimg.com/vi/XpLP9JpYtKc/default.jpg)
![How I Design and 3D Print Parts with Rhino 3D and MakerBot Replicator 2 - The Magic Coin Paddle](https://i.ytimg.com/vi/GaO9g0v_QYI/default.jpg)
![Autonomous Aerial Video of Onion Creek using Pixhawk and ArduCopter 3.2](https://i.ytimg.com/vi/1Bpsn_sVU8k/default.jpg)
![RAD MAVLink Bridge Installation Script for Raspberry Pi](https://i.ytimg.com/vi/jp7FAdb7VbE/default.jpg)