I Turned a Spoon into a DRAGON and SWORD! | ASMR, kind of
Hi guys, it's good to be back at it again!! In this video I turned a simple old stainless steel spoon into a dragon and sword. This one was quite a challenge, as I had to figure out how to design the dragon just right so that the sword locks in by tension with the dragon at certain points, using the curvature of the spoon.
As you've seen in most of my videos, I used the trusty ol' jeweler's saw to do most of the cutting. By the time I got done cutting out the dragon, (which seemingly took FOREVER) I decided to make quick work of the sword and use my angle grinder instead. Each piece was sanded down all the way to 1200 grit sandpaper, then super fine steel wool, and finally finished up with white polishing compound on my Dremel using a buffing bit.
Then of course, what's a dragon without FIRE!? I used a simple Harbor Freight micro torch for heat bluing the steel. Originally I had planned for a more consistent blue with a fade out to purple, but that was quite difficult with the very narrow flame. HOWEVER, I really love how it wound up giving the dragon a random, kind of galactic appearance of coloring on the dragon. Anyway, I hope you all enjoy this one, let me know what you think in the comment section! And of course, if you have any questions, don't hesitate to ask!
Видео I Turned a Spoon into a DRAGON and SWORD! | ASMR, kind of канала Ross The Random
As you've seen in most of my videos, I used the trusty ol' jeweler's saw to do most of the cutting. By the time I got done cutting out the dragon, (which seemingly took FOREVER) I decided to make quick work of the sword and use my angle grinder instead. Each piece was sanded down all the way to 1200 grit sandpaper, then super fine steel wool, and finally finished up with white polishing compound on my Dremel using a buffing bit.
Then of course, what's a dragon without FIRE!? I used a simple Harbor Freight micro torch for heat bluing the steel. Originally I had planned for a more consistent blue with a fade out to purple, but that was quite difficult with the very narrow flame. HOWEVER, I really love how it wound up giving the dragon a random, kind of galactic appearance of coloring on the dragon. Anyway, I hope you all enjoy this one, let me know what you think in the comment section! And of course, if you have any questions, don't hesitate to ask!
Видео I Turned a Spoon into a DRAGON and SWORD! | ASMR, kind of канала Ross The Random
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
I Turn ONE Screw into a Little SCORPION!CARNAGE RING Made From an Old Copper Nozzle! (With Simple Tools)I Carve a Heart INSIDE a Heart Made of Tiny Hearts!Watch a Single Bolt Turn into A Phoenix! (Basic Tools)I Turn Some NUTS and BOLTS into a WASP! (Hardware Hornet)Power Carving a Great White Shark out of Walnut | Wood Carving12 Years, 12 Petals | Sunflower Wood CarvingI Turn Plastic Trash Into ART! (Weirwood Tree Sculpture)Power carving a Phoenix out of a pine 2x4I turn a Coin into a tiny Spider SculptureI Make A Sculpture Lamp Out of Plaster | STS9 InspiredWatch Me Transform This Spoon Into VENOM!Hand Carving a Feather Pendant TIME LAPSECarve a SIMPLE Wood PENDANT | Raven/Crow SkullCarving a 20 Year Old Wooden Spoon... Into a Necklace Pendant!Making a DRAGON head/skull carving out of a POPSICLE STICK | DIYHello Internet, Welcome to My Channel!