I Turn Some NUTS and BOLTS into a WASP! (Hardware Hornet)

In this video, I show you how I turn a few brass nuts and bolts into a little hornet/wasp sculpture.

TOOLS USED:

•This is the VISE I used, and I LOVE it!
https://amzn.to/32gvWGa
•JEWELER'S SAW
https://amzn.to/2v8zoqd
•MAP PRO TORCH
https://amzn.to/2HOwSbo
•FILE SET
https://amzn.to/37LjijC

I got the idea of turning my drill into a makeshift lathe while watching some Mr Custom Crafts videos, so if you like this sorta thing, definitely go check out his channel!
https://www.youtube.com/channel/UCe6rs1ze7rDxcGDbtCbYY1A

For each piece, I started with various files, then sanded with 500, 1000, and 1200 grit sandpaper, finishing up with the super fine steel wool, and polishing up with some Nevr-dull I had laying around.

To cut the pieces, I used a jeweler's saw, which is a lot of fun to work with! I will post links to the tools very soon :)
UPDATE! So many of you have asked how long this took. It's hard to say exactly. I work a full time job (for now!), so some days I can get an hour or two in. Some days I can't get any time in. This took about a month, working a little at a time. So if I had to guess I'd say 25-30 hours, maybe more. Keep in mind, moving and setting up the camera for each shot really adds a bit of time as well.

TL;DR.. a while.

______________________________________________
DISCLAIMER: This video and/or the description contains affiliate links, which means that if you purchase through one of the product links, I'll receive a small commission. This helps support the channel and allows me to continue making videos like this. Thank you for the support!

Видео I Turn Some NUTS and BOLTS into a WASP! (Hardware Hornet) канала Ross The Random